OSD WDR Digital CCTV Camera Digital ZOOM X6 UltraVision Series MANUAL www.provision-isr.com High Resolution www.provision-isr.
General Content General Precautions Features Structure and Components Connecting your camera OSD Menu OSD Menu Operation 1) Camera Name 2) Lens 3) Exposure 4) Day/Night Settings 5) WDR/BLC/ECLPS 6) White Balance Settings 7) 3D-DNR 8) Effects Menu 9) Special Menu Specifications WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN Note: Only professional technicians is allowed to open the front or back cover of this camera.
Features WDR (Wide Dynamic Range): Provides a powerful Wide Dynamic Range solution, allows the camera to provide vivid colors without losing details. The difficult lighting is automatically compensated to extract the details in both bright and dark areas, without having cutoff or saturation. The UltraVision DSP enhanced WDR performance has strong light compensation, so it always shows clear and perfect contrast picture in any environment.
Structure and Components Connecting your camera - Connecting the lens Before mounting a lens, please check whether it is a C-mount or CS - mount lens. The back focus is set for the CS-mount lens at the factory. Connect your lens by turning it clockwise to the Lens mount ring (4), In case of auto iris lens, connect the lens cable to the Auto iris socket (6).
OSD Menu OSD Main Menu Main Menu This camera utilizes an on-screen user MENU. To set items on the menu, use the following buttons on the OSD panel. Cam Name On/Off Lens DC IRIS/Manual Exposure AGC / Shutter / Sens-Up / Initial Set / Previous Day/Night Day / Night / EXT – WDR Level / Auto – D/N Level, Filter Dly, Night Burst, Initial Set. WDR/BLC/ECLPS WDR Level / BLC Level / Eclipse – Area Settings, All Area Set, Mask Color, Eclps Level, Gain Control. White Bal ▲ – Moves the cursor upwards.
OSD Menu Operation - To enter the MAIN MENU screen Press O. The MAIN MENU screen appears on the monitor. - To exit the MAIN MENU screen. Use ▲ or ▼ button to select the EXIT then Press O. Note: When you see the sign Press O for sub-menus. < MAIN MENU> 1.CAM NAME 2.LENS 3.EXPOSURE 4.DAY/NIGHT 5.WDR/BLC/ECLPS 6.WHITE BAL 7.3D-DNR 8.EFFECTS 9.SPECIAL 0.EXIT OFF DC IRIS AUTO WDR ATW ON RET 1) Camera Name You can set a name for your camera which will be displayed on the monitor.
- You can also adjust the position of the name on your monitor. For adjusting select POS and press O. - Use ▲▼◄► to move your name across the monitor and press O when finished. ◄ ►▲▼ MOVE AND PRESS SET 2) Lens Iris is mechanism which closes and opens allowing more or less light into the lens.
- When selected DC IRIS you can press O for entering DC IRIS MENU In order to set the BRIGHTNESS level. - Use ◄ or ► to select the BRIGHTNESS level 0-100. BRIGHTNESS PREVIOUS 50 -----|----- 3) Exposure To compensate for the lighting conditions, the exposure control can be adjusted. Use this menu to set the means for the camera to automatically control the brightness. Available means include automatic gain control (AGC), electronic light control (ELC or SHUTTER) and slow-shutter (SENS-UP).
AGC SHUTTER SENS UP INITIAL SET PREVIOUS OFF OFF OFF AGC (Automatic Gain Control) At low-lighting conditions, if the image is too dark, select between OFF/LOW/MIDDLE/HIGH. Higher AGC level means the camera would amplify the CCD input signal more, and the image would become brighter, but noisier. - Scroll to AGC using ▲ or ▼. - Use ◄ or ► for selecting the allowed gain level. SENS-UP When this mode enabled, the camera would use digital slow shutter of over a field-time when needed.
4) Day/Night Settings a) If selected AUTO press O to enter D/N AUTO MENU Day/Night refers to the mechanism of changing of the optical filter between IR-cut filter to non-IRC filter. AUTO - set the filter automatically, DAY - force the usage of the IRC filter (color), and NIGHT- force usage of IR-PASS filter (and display B&W image). EXT- is used for Smart-IR mode when the IR-LED board provides the light info to the camera. - Scroll to DAY/NIGHT using ▲or▼. - Choose DAY/NIGHT/EXT/AUTO using ◄ or ►.
b) If Selected EXT press O to enter D/N EXT Menu. This is related to the Smart-IR when working with IR-LED camera. It refers to the level of saturation the camera should allow at night when the IR LED works. 5) WDR/BLC/ECLPS WDR is used when your want to see BOTH bright and dark zones of the image. In the mode, you will see the details in both the dark and bright; however, the image sometimes looks a little 'flat'. - Use ◄or► to select level between LOW/MIDDLE/HIGH. - Scroll to WDR/BLC/ECLPS using▲ or ▼.
b) If selected BLC press O to enter BLC MENU. BLC is used when you have a WDR scene, and you want to see the DARK zone, and you do not mind if the bright zone would be saturated. - Use ◄or► for selecting BLC level between LOW/MIDDLE/HIGH. BLC LEVEL PREVIOUS LOW PREVIOUS – Return to previous menu c) If selected Eclipse press O for entering ECLIPSE MENU. ECLIPSE is mainly used when you want to see cars at night, and want to mask the car strong head-lights.
6) White Balance Settings AREA SETTING ALL AREA SET MASK COLOR ECLPS LEVEL GAIN CONTROL PREVIOUS OFF GRAY 1----|---OFF ECLPS LEVEL You can choose the ECLIPSE LEVEL between 1–5. Higher values will increase start the masking at higher level. - Scroll to ECLPS LEVEL using ▲ or ▼. - Use◄ or ► to set a level between 1-5. GAIN CONTROL You can set an automatic control for the ECLIPSE LEVEL gain. - Scroll to GAIN CONTROL ▲ or ▼. - Use◄ or ► to select ON/OFF.
PUSH It is use in environment full of none “white” light (like bright yellow light) which affect the AWB and cause a falls color under AWB. In this case you can take a white paper in natural light environment and choose PUSH. The WB values will be set from now and will not change automatically any more. MANUAL For Setting up WHITE BALACE SETTING manually select MANUAL and press O, The WB MANUAL MENU will appear RED - Scroll to RED using ▲ or ▼. - Use ◄ or ► to set amount of RED.
7) 3D-DNR The camera is equipped with the most advance Motion compensated 3D-DNR (3-Dimensional Digital Noise Reduction) function; it operates in both spatially and temporally, while calculating and compensating for motion in the image to minimize ghosts. The result is a superior noise reduction with less motion blurring artifacts even at extreme low-light situations.
8) EFFECTS MENU Here you can find a collection of special effects to handle the image. - Scroll to EFFECTS using▲ or ▼. DZOOM MODE Allows you to digitally zoom the image and tour inside it. - Scroll to DZOOM MODE using ▲ or ▼. - Use ◄ or ► to select ON/OFF. - If selected ON press O and the DIGITAL ZOOM MENU will appear. < MAIN MENU> OFF DC IRIS 1.CAM NAME 2.LENS 3.EXPOSURE 4.DAY/NIGHT 5.WDR/BLC/ECLPS 6.WHITE BAL 7.3D-DNR 8.EFFECTS 9.SPECIAL 0.
ZOOM - Scroll to ZOOM using▲ or ▼. - Use ◄ or ► to select zoom level X1.00 - X6.13. DZOOM PAN - Scroll to DZOOM PAN using ▲ or ▼. - Use◄ or ► to select PAN LEVEL -100 - +100. - Use◄ for left, ► for right. DZOOM TILT - Scroll to DZOOM TILT using ▲ or ▼. - Use ◄ or ► to select TILT LEVEL -100 - +100 - Use◄ for up, ► for down. PREVIOUS – Return to previous menu IMAGE FREEZE Pausing the live image. - Scroll to IMAGE FREEZE using▲ or ▼. - Use ◄ or ► to select ON/OFF.
CR GAIN Set CR GAIN level. - Scroll to CR GAIN using ▲ or ▼. - Use ◄ or ► to select CR Gain level between 0 – 100. COLOR Set Color/Black & White picture. - Scroll to COLOR using ▲ or ▼. - Use ◄ or ► to set ON/OFF. DZOOM MODE IMAGE FREEZE D-EFFECT COLOR CONTRAST SHARPNESS CR GAIN CB GAIN INITIAL SET PREVIOUS OFF OFF OFF ON 50 -----|---50 -----|---50 -----|---50 -----|---- CB GAIN Set CB GAIN level. - Scroll to CB GAIN using ▲ or ▼. - Use ◄ or ► to select CB Gain level between 0 – 100.
9) SPECIAL MENU Here - Scroll to SPECIAL using ▲ or ▼. < MAIN MENU> OFF DC IRIS 1.CAM NAME 2.LENS 3.EXPOSURE 4.DAY/NIGHT 5.WDR/BLC/ECLPS 6.WHITE BAL 7.3D-DNR 8.EFFECTS 9.SPECIAL 0.EXIT AUTO WDR ATW ON RET - Press O and the SPECIAL MENU will appear. MOTION DETECT Your camera transmits an alert signal when it detects motion of an object on the screen. You can connect the camera to an external alarm or recording system, and activate it when the camera detects motion.
ZONE NUMBER - Scroll to ZONE NUMBER using ▲ or ▼. - Use ◄ or ► to select ZONE1 – ZONE 8. ZONE STATE - Scroll to ZONE STATE using ▲ or ▼. - Use ◄ or ► to set ON/OFF. WIDTH Enlarge or decrease the horizontal size of the zone - Scroll to WIDTH using ▲ or ▼. - Use ◄ or ► to change width 16 – 90. HEIGHT Enlarge or decrease the vertical size of the zone. - Scroll to HEIGHT using ▲ or ▼. - Use ◄ or ► to change height 12 – 54. MOVE X Moves horizontal position of the zone. - Scroll to MOVE X using ▲ or ▼.
MASK NUMBER MASK STATE MASK COLOR WIDTH HEIGHT MOVE X MOVE Y INITIAL SET PREVIOUS MASK1 OFF GRAY 30-----|----30-----|----30-----|----30-----|----- MASK NUMBER - Scroll to MASK NUMBER using ▲ or ▼. - Use ◄ or ► to select MASK 1 – MASK 8. MASK STATE - Scroll to MASK STATE using ▲ or ▼. - Use ◄ or ► to set ON/OFF. MASK COLOR - Scroll to MASK COLOR using ▲ or ▼. - Use ◄ or ► to select a color GRAY/WHITE/RED/GREEN/BLUE/YELLOW/BLACK. WIDTH Enlarge or decrease the horizontal size of the mask.
- Scroll to STABILIZER using ▲ or ▼. - Use ◄ or ► to set ON/OFF. L/L SYNC The Line-Lock (L/L) feature allows the camera to synchronize its frame rate to the power line phase. The function is only available when the camera is operated by AC power. It allows the reduction of the fluorescent lights color rolling effect. When using 12v DC power, the camera is automatically set to internal (INT) synchronization mode. - Press O and the COMM SETTING MENU will appear.
DISPLAY ID You can choose if your camera ID will be displayed or not. - Scroll to DISPLAY ID using ▲ or ▼. - Use ◄ or ► to select ON/OFF. ID POSITION You can choose the position where your camera ID will be displayed on the monitor. - Scroll to ID POSITION using ▲ or ▼and press O. - Use ◄ or ► to select a position and press O when finished. Specifications Model No. BX-361UV Power DC12±10% Max 2.
