Operation Manual

17
EXIT Exit the menu setting.
*in case you are setting-up the cruise using Provision-ISR DVR, make sure
that you mark “Simulative Cruise” as active. Otherwise, the cruise may not
work.
3.11 IR Settings (Only Applicable in IR Dome Cameras)
IR SETTING Menu function descriptions
IR MODE AUTO
ON:IR light is forced to be on constantly; OFF:
Infrared light is forced to be off constantly; AUTO:IR
light will switch automatically.
IR ON SENS240 Light intensity for IR light to turn on, within 81~254.
IR OFF SENS 170 Light intensity for IR light to turn off, within 81~254.
BACK Return to the previous menu.
EXIT Exit the menu setting.
CURRENT LEVEL
On screen display of current light conditions for
reference
3.12 DISPLAYSETUP Settings
DISPLAY SETUP Menu function descriptions
ZOOM ON/OFF Zoom display ON/OFF.
P/T DEG ON/OFF
Horizontal/Vertical coordinates display
ON/OFF.
BRIGHTDATA ON/OFF Light source data display ON/OFF.
IR DATA ON/OFF IR light data display ON/OFF.
BACK Return to the previous menu.
EXIT Exit the menu setting.