Operation Manual

14
3.7.4POWER UP Settings:
This will define which action the dome camera will perform when it is powered
on. (unless any other action was received). Parameters in the following table:
POWER UP Menu function descriptions
NONE Don’t perform any action.
AUTO SCAN Perform continuous scanning action.
RANDOM SCAN Perform random scanning action.
FRAME SCAN Perform frame scan action*
PRESET 1 Send the camera to Preset No.1
PRESET 8 Send the camera to Preset No.8
PATTERN 1 Perform the pattern 1
PATTERN 2 Perform the pattern 2
PATTERN 3 Perform the pattern 3
PATTERN 4 Perform the pattern 4
CRUISE Perform cruise action*
*Applicable only if these functions are properly set-up.
3.7.5 PARK ACTION Settings:
Park action parameters shown in the following table:
PARK ACTION Menu function descriptions
NONE Don’t perform any action.
AUTO SCAN Perform continuous scanning action.
RANDOM SCAN Perform random scanning action.
FRAME SCAN Perform frame scan action*
FRESET 1 Send the camera to Preset No.1
PRESET 8 Send the camera to Preset No.8
PATTERN 1 Perform the pattern 1
PATTERN 2 Perform the pattern 2
PATTERN 3 Perform the pattern 3
PATTERN 4 Perform the pattern 4
REAPEAT LAST Automatic recovery to last running action (If applicable)
CRUISE Perform cruise action*
*Applicable only if these functions are properly set-up.