Operation Manual

13
3.7 MOTION (PTZ) Settings:
This menu is used to set PTZ parameters such as movement and orientation
angles as shown in the following table:
MOTION Menu function descriptions
SET FRAME SCAN
Set the scan left and right limits.
See More Details in section 3.7.1.
POWER UP NONE
Power on setting menu.
See More Details in section 3.7.4.
PARK TIME 15S Waiting time before performing idle action.
PARK ACTION NONE
Which action to perform when the dome
camera is idle.
See More Details in section 7.4.5.
FRAME SCAN SPEED
16
Set the area scan speed of the dome camera.
Within1 (Slowest)~32 (Fastest).
RANDOM SCAN SPEED
16
Set the intermittent scan speed of the dome
camera.
Within 1 (Slowest)~32 (Fastest).
BACK Return to the main menu.
EXIT Exit the menu setting.
3.7.1 SET FRAME SCAN:
Setting the Left and Right limits of the Frame scan
FRAME SCAN Menu function descriptions
SET SCAN POSITION The left and right Limits in Two stages
CLEAR FRAME SCAN
Clear area scanning setting. (Clear left and right
limit position).
BACK Return to the previous menu.
EXIT Exit the menu setting.