Operation Manual

12
3.5 SYSTEM INFORMATION:
SYSTEM INFORMATION Menu function descriptions
COM 2400,N,8,1
Serial information, display the dome
camera serial port baud rate, parity, data
bits, stop bits of information.
ADDRESS 1 Display the current dome camera address
PROTOCOL PELCO-D
Display the current dome camera
communication protocol.
PRESETS 256
Display the current dome camera preset
number.
SOFTWARE VERSIONV#.# Display the current software version.
BACK Return to main menu.
EXIT Exit the menu setting.
Note: The system information menu items cannot be modified.
3.6 ADDRESS SETTINGS:
ADDR SETTING Menu function descriptions
ADDR TYPE HARD
Divides HARD and SOFT; select the SOFT can
directly determine the dome camera address.
ADDR SOFT 1 Within1~254.
ADDR HARD 1 (Configured by DIP Switch)
BACK Returns to main menu.
RESET To restore the default settings.
EXIT Exit the menu setting.
Note: Soft and hard address settings must be identical. Not complying
may cause the camera to go out of control. In such case, restoring to
factory default settings will be required.