Operation Manual

11
3.4OSD Main Menu
Once the dome camera is power on and finished self-testing, call preset 95in
order to access the ODS main menu as shown in Table 3.1.
MAINMENU Menu function descriptions
SYSTEM
INFORMATION
Displays camera basic information.
See More Details in section 3.5.
ADDR SETTING
Used to set the camera address.
See More Details in section 3.6.
MOTION
“PTZ” setup menu.
See More Details in section 3.7.
PATTERNS
Pattern scan setting.
See More Details in section 3.8.
CAMERA
Lens setting.
See More Details in section 3.9.
CRUISE SETTING
Preset point cruise setting.
See More Details in section 3.10.
IR SETTING*
Infrared light setting.
See More Details in section 3.11.
DISPLAY SETUP
Screen display setting.
See More Details in section 3.12.
RESTORE FACTORY
DEFAULT
Restore the settings to factory default.
REBOOT SYSTEM System restart, the dome camera will reset.
EXIT Exit the OSD menu setting.
*Note:<IR SETTING> is valid only for infrared dome camera model