Operation Manual

1.2 Package Contents:

1. Speed Dome Camera – 1 Pcs

2. Wall Bracket – 1 Pcs

3. Ceiling Bracket – 1 Pcs

4. Power Supply – 1 Pcs

5. User Manual – 1 Pcs

6. Installation Accessories – Lot.

1.3Main Functions Description:

1. Set address coding, baud rate, control protocol:

Each command transmitted to the camera has its own address coding,

baud rate and control protocol. APTZ camera will respond only if its own

address coding, baud rate and control protocol matches the ones of the

command. In order to set the camera address coding, baud rate and

control protocol settings please refer to the DIP settings.

2. Auto speed matching to focal length technical:

Based on user-friendly design, the camera's intelligent response

mechanism will be generate different tracking speeds according to the

proximity of the focal length of the camera. The camera will automatically

adjust the horizontal and vertical tracking speed, so that manual operation

is simpler and track targets become easier.

4. Auto Flip:

When the lens is pulled all the way down (vertically) by the operator, the

lens will auto-rotate 180° and continue the move turning up immediately

after the 90°, this allows a direct watch to the back of the scene in order to

achieve the full 180° continuous vertical surveillance.

5. Set and call preset position:

Preset function stores a given state of the ball. The PTZ memory will store

the horizontal angle; tilt angle and camera lens focal length. "Calling" these

parameters will quickly send the PTZ ball to the saved location. The

operator can quickly and easily store and call preset points by using a PTZ

keyboard, infrared controller or other equipment such as DVR which

supports PTZ feature. The PTZ supports up to 256 preset points.