Operation Manual

10
3.2.2 Call preset points:
(1) Make sure the correct camera is selected in your controller.
(2) Press the required preset number (inputs the designated preset) +
PREVIEW* button, the camera will immediately move to the desired preset
position. The lens zoom, focus and Iris will also automatically change to the
preset parameters
If the preset input is a special function preset (see "Preset Point table" below),
the dome camera will perform special features functions (such as: Preset 82:
the camera will perform auto-cruise feature).
*Subject to changes according to your controlling device. Please check your
PTZ controller user manual to confirm
3.3 Preset point function table:
Dial the 95
th
Presets Enter Main menu.
Dial the 82
nd
Presets Auto Scan.
Dial the 83
th
Presets Clear all presets
Dial the 84
th
Presets Pattern Scan 1
Dial the 85
th
Presets Pattern Scan 2
Dial the 86
th
Presets Pattern Scan 3
Dial the 87
th
Presets Pattern Scan 4
Dial the 96
th
Presets 360-degree gap scan
Dial the 97
th
Presets Frame Scan
Dial the 98
th
Presets Presets Cruise
Dial the 99
th
Presets 360 degree continuing Scan
*Subject to changes according to your controlling device. Please check your
PTZ controller user manual to confirm