User manual

Page 2
IP CAMERA USER MUANUAL
2 Installation
2.1 Install IP-CAM to Ethernet Network
The connection of digital video server is show below.
Figure 2-1 Connection
Please connect the PC and IP-CAMERA in accordance with the above picture.
The connection steps are shown as below:
Step 1: Connect the monitor, microphone and network to the device.
Step 2: Connect the power supply.
Step 3: Install the device.
2.2 CMS and IP-Tool Installation
Find CMS software from CD and then double click “Setup.exe” file to pop up
installation wizard.
Install the software according to the prompts in the wizard. After you complete the
installation, you will see the CMS and IP-Tool icon on the desktop. Please see the user
manual of this software for more details.
If you need to install IP-Tool separately, please double click IP-Tool installation
package and install it according its wizard prompts. After you finish installing, double
click IP-Tool icon to start IP-Tool.