User manual

Page 42
IP CAMERA USER MUANUAL
8 Q & A
Q: How to find my password if I forget it?
AReset all settings by IP-Tool or contact your dealer.
Default IP: 192.168.226.201
User name: admin
Password: 123456
QFail to connect devices through IE browser, why?
A: Network doesn’t connect well. Please check the connection and make sure it
connected well.
B: IP is not available. Reset the valid IP.
C: Web port number has been revised: contact administrator to get the correct port
number.
D: Exclude the above reasons. Recover default setting by jointing the default line and
GND line.
Note: default IP: 192.168.226.201mask number: 255.255.255.0
QIP tool cannot search devices, why?
AIt may be caused by the anti-virus software in your computer. Please exit it and try to
search device again.
QIE cannot download ActiveX control. How can I do?
a. IE browser blocks ActiveX. Please do setup following below.
Open IE browser. Click Tools-----Internet Options….
select Security------Custom Level….Refer to Fig 4-1
Enable all the sub options under “ActiveX controls and plug-ins”. Refer to Fig 4-2