User manual

Page 28
IP CAMERA USER MUANUAL
Fig 5-27 Reboot device interface
5.5.5 Upgrade
Enter into Advanced Configuration—Upgrade interface shown as Fig 5-28:
1. Click “Browse” button to select the save path of the upgrade file
2. Click “Upgrade server firmware” button to start upgrading the application program
3. The device will restart automatically
4. After you successfully update the software, click “OK” button to close IE and then
re-open IE to connect IP-Cam.
Fig 5-28 Upgrade
Notice: User can’t disconnect to PC or close the IP-CAM during upgrade.