User manual

Page 26
IP CAMERA USER MUANUAL
MAC” text box.
6. Click “OK” button to modify user’s password and binding MAC address
successfully.
Delete user:
1. Select the user which needs to delete in the user configuration list box.
2. Clicking “Delete” button will pop up a confirm dialog box. Then click “OK” to delete
the user.
Note: The default super administrator cannot be deleted.
5.5.2 Security Configuration
Enter into Advanced ConfigurationSecurity Configuration to see a tab shown in Fig
5-25:
Check “Enable IP address” check box, select “Deny the following IP address”, input IP
address in the IP address list box and click “Add” button. Then this IP address will
display in the list box; the operation step of “Allow the following IP address” is the
same with “Deny the following IP address”
Select the IP address which needs to be deleted from the IP address list box and click
“delete” button to delete that IP address.
Check “Enable MAC address” check box, select “Deny the following IP address”, input
MAC address in the MAC address list box and click “Add” button. Then this MAC
address will display in the list box; the operation step of “Allow the following MAC
address” is the same with “Deny the following IP address”.
4. Select the MAC address which needs to be deleted from the MAC address list box
and click “delete” button to delete that MAC address.
5. Click "save" button to save the above setting.
Parameter
Meaning
User Name
User name to operate the logon client end
User Type
Type of users, normal user, advanced user and super administrator
Binding MAC address
The MAC addresses of user access the server which should setup
according to actual MAC address of server.
Password
Password to log in the client terminal
Confirm Password
Password to log in the client terminal