User manual
Page 24
IP CAMERA USER MUANUAL
4.Select the secure connection type at the Secure Connection pull down list according to
user’ actual needs
5. Receival email address list: add email address into the list
6. Receival email address: receiver’s e-mail address
7. After all parameters setup, user can click “Test your account settings”. If email sent
successful, a “Test Successful” window will pop up, if not, users can try other email
addresses or check the setting.
Notice: If user change the static IP into PPPoE and select mailbox, there will be an
e-mail sent to users’ mail box for notify a new IP address.
5.4.10 FTP
Enter into Network ConfigurationFTP interface; please refer to Fig 5-20:
Fig 5-20 FTP Setting
1. Add: Click Add button to input FTP server’s server name, address, port number, user
name, password, and upload path, click OK to confirm the setting. Refer to Fig 5-21:
2. Modify：User can click this button to change some information of the FTP server
3. Delete：Select certain FTP account; Click this button to delete this account
4. Test ：Select certain FTP account; Click this button to test its valid or not.
Please refer to the following table for parameters and instructions of FTP configuration.
Fig 5-21 Add
5.5 Advanced Configuration
Advanced configuration includes five submenus: User Configuration, Onvif
Configuration, Security Configuration, Configure Backup & Restore, Reboot and
Parameter
Meaning
Server name
The name of the FTP server
Server address
The address of the FTP server
Port
The port number of the FTP server
User name
The user name of the FTP server
Password
The password of the FTP server
Path
The save path for FTP files