User manual

Page 21
IP CAMERA USER MUANUAL
Step 2: Click to enter the website.
Step 3: Click "New User" in the right of homepage to register. For example: User ID is
‘abc’, and password is ‘123456’. The register dialog display as below:
(2) Login
Step 1: Return to homepage after registering successfully.
Step 2: Click "Account Manager" on the right of homepage to login.
Step 3: Input the username and password with the information that you have registered.
Step 4: Click "Enter" key after filling in the textbox.
Log in
(3) Domain Setup
Step 1: Click "Domain Management" on the left to set the domain.
Domain setup
Step 2: Input the domain in the textbox. For example, you set ‘IP-CAMERA’ as the
domain.
Step 3: Click "Submit" button, the system will pop up a dialog box to show that the
domain is added successfully.
Note: Time of probationary period is one month. If user wants to use it continuatively
after one month, please Step 4: click "Buy Now" in the right of homepage to pay for it.
2. Setup in the IP-CAMERA
⑴ DOMAIN
Domain is set in ‘1. Apply the Domain Name’. According to the example above, the
domain is ‘WWW. IP-CAMERA.dns2p.com’.
⑵ USER ID
Username of registered which is set in ‘(1) Register in the Web’. According to the
example above, user ID is ‘abc’.
⑶ PASSWORD
Password is set in ‘(1) Register in the Web’. According to the example above, password
is ‘123456’.
Note: If the connection fails, press the "INFO" button. Now the system will display:
‘DDNS NONE’. Then you need to check network and information above and try again.