User manual

Page 11
IP CAMERA USER MUANUAL
5.1.2 Date & Time Configuration
Setting steps:
1. Enter into "System Configuration" “Date & Time”. Refer to Fig 5-2:
2. Select “Modify Time " to self-define time. Choose "Time Zone" according to user’s
location.
3. Set DST as required.
4. User can setup time by select the “Synchronize with NTP Server”.
5. Press the "Save" button to save the settings.
Fig 5-2 Date &Time Config
5.2 Video Configuration
Camera Configuration includes four submenus: Camera Configuration, Video Stream,
Time Stamp and Video Mask.
5.2.1 Camera Configuration
Setting steps:
1. Enter into "Video Configuration " "Camera" interface as shown in Fig 5-3:
Fig 5-3 Basic Configuration