User manual

Page 30
IP CAMERA USER MANUAL
： Open/Close audio. Choose the channel and click this button to open/close the
audio of this channel.
：Open/Close talk. Click this button to pop up the servers which support talk
function. Select the device to start talking.
：Set video parameter button. Select the channel and click this button to set the
video parameters including brightness, hue, saturation and contrast.
：PTZ button. Click this button to pop up PTZ control panel.
：Choose bitrate priority or quality priority according to
your network condition.
Channel indicator instruction:
：Video loss ： Schedule recording ：Others
：Sensor alarm ：Motion alarm
：Motion /sensor alarm based recording or manual recording
3. Server list
Click button to pop
up the following picture.
 Add device: Click “Add”
button in the top right corner to
pop up a dialog box as shown in
the following left picture. Input
the relative information of the
device and click “Save” button.
 Delete device: Click
button behind the device name to delete this device.
 Edit device: Click button behind the device name to edit the information of this
device.
 Backup & restore: It is recommended to click “Backup” button to reserve the
information of all devices. Then you can click “Restore” button to restore all device
information after you re-install the client or delete the device uncarefully.

indicates the device has been connected;
 indicates the device is connecting;
 indicates the device is not connected.