User manual
Page 25
IP CAMERA USER MANUAL
Note: The default super administrator cannot be deleted.
4.5.2 Security Configuration
1. Go to Advanced ConfigurationSecurity Configuration to see a tab shown below.
2. Check “Enable IP address” check box, select “Deny the following IP address”, input IP
address in the IP address list box and click “Add” button. Then this IP address will display in
the list box; the operation step of “Allow the following IP address” is the same with “Deny
the following IP address”.
3. Select the IP address which needs to be deleted from the IP address list box and click
“Delete” button to delete that IP address.
4. Check “Enable MAC address” check box, select “Deny the following IP address”, input
MAC address in the MAC address list box and click “Add” button. Then this MAC address
will display in the list box; the operation step of “Allow the following MAC address” is the
same with “Deny the following IP address”.
5. Select the MAC address which needs to be deleted from the MAC address list box and
click “Delete” button to delete that MAC address.
6. Click “Save” button to save the above setting.
4.5.3 Configure Backup & Restore
Go to Advanced configurationConfigure Backup & Restore Interface.
Import & Export Configuration:
Parameter Meaning
User Name User name to operate the logon client end
User Type Type of users, normal user, advanced user and super administrator
Binding MAC address
The MAC addresses of user access the server which should set up
according to actual MAC address of server.
Password Password to log in the client terminal
Confirm Password Password to log in the client terminal