PROVISION-ISR DAI-310IP04 I3-310IP04 DI-310IPVF DAI-390IP04 I3-390IP04 DI-390IPVF DAI-390IP04 I3-390IP04 DI-390IPVF User Manual IP Camera For H.
Notes Before operation, we strongly advise users to read this manual and keep it properly for using later. Please use the specified power supply to connect. Avoid from incorrect operation, shock vibration, heavy pressing which can cause damage to product. Do not use corrosive detergent to clean main body of the camera. If necessary, please use soft dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any cleanser for high grade furniture is applicable.
IP CAMERA USER MANUAL Table of Contents 1 2 Introduction.........................................................................................................1 IE Remote Access .................................................................................................2 2.1 2.2 3 4 Access through IP-Tool......................................................................................... 2 2.1.2 Directly Access through IE...................................................................
IP CAMERA USER MANUAL 6 7 5.2 By Phones with iPhone OS ................................................................................................. 27 7.3 By Phones with Android .................................................................................................................. 33 IP-Tool...............................................................................................................36 Q & A ..............................................................................
Page 1 1 IP CAMERA USER MANUAL Introduction This IP-CAMERA (short for IP-CAM) is designed for high performance CCTV solutions. It adopts state of the art video processing chips. It utilizes most advanced technologies, such as video encoding and decoding technology, complies with the TCP/IP protocol, SoC, etc to ensure this system more stable and reliable. This unit consists of two parts: the IP-CAM device and central management software (short for CMS).
Page 2 IP CAMERA USER MANUAL 2 IE Remote Access You may connect IP-Cam via LAN or WAN. Here only take IE browser (6.0) for example. The details are as follows: 2.1 LAN In LAN, there are two ways to access IP-Cam: 1. access through IP-Tool; 2. directly access through IE browser. 2.1.1 Access through IP-Tool ① Make sure the PC and IP-Cam are connected to the LAN and the IP-Tool is installed in the PC from the CD.
Page 3 IP CAMERA USER MANUAL administrator and click “Modify” button to modify the setting. The default password of the administrator is “123456”. ④ Double click the IP address and then the system will pop up the IE browser to connect IP-CAM. IE browser will auto download the Active X control. After downloading, a login window will pop up as shown below. Input the username and password to log in. The default username is “admin”; the default password is “123456”. 2.1.
Page 4 IP CAMERA USER MANUAL Select “Property” and then select internet protocol according to the actual situation (for example: IPV4). Next, click “Property” button to set the network of the PC. ② Open the IE browser and input the default address of IP-CAM and confirm. The IE browser will download Active X control automatically. ③ After downloading Active X control, the login dialog box will pop up. ④ Input the default username and password and then enter to view. 2.
Page 5 IP CAMERA USER MANUAL ② Go to Config Network ConfigWired menu to modify the IP address. ③ Go to the router’s management interface through IE browser to forward the IP address and port of the camera in the “Virtual Server”. Port Setup IP Setup Router Setup ④ Open the IE browser and input its WAN IP and http port to access.
Page 6 IP CAMERA USER MANUAL 3 Remote Preview 3.1 The Remote Preview Interface 1 People icon 6 Full screen 2 Fix size 7 Start recording 3 Actual size 8 Playback 4 Zoom in 9 Snap 5 Zoom out 10 Enable audio When motion detection alarm is triggered, the people icon will turn red. Right click to pop up a pull-down list as shown below: Stream: Three streams are optional. Turn off the live: Click this item to close present live preview.
Page 7 IP CAMERA USER MANUAL 3.2 Playback Before you play the record files, please make sure you have recorded. You may click button to record. Then click button to pop up a video player. Double click the record file to play the video as shown below. 1 Play 5 Next frame 9 Zoom out 2 Pause 6 The previous file 10 Full screen 3 Stop 7 The next file 11 Path 4 Forward 8 Zoom in 12 Volume 3.
Page 8 IP CAMERA USER MANUAL Snap multiple pictures Select the picture number from Frame pull down list box, such as 2, and check “Title” and “Time” to show capture title and time on the snap pictures simultaneously.
Page 9 IP CAMERA USER MANUAL 4 Remote Live Surveillance Functions of remote configurations include: System Configuration, Video Configuration, Alarm Configuration, Network Configuration and Advanced Configuration. You should firstly select the menu on the left, and then set up the relative parameters. When one user configures parameters of a certain device, other users can not set up this device. 4.1 System Configuration The “System configuration” includes two submenus: Basic Information and Date & Time.
Page 10 IP CAMERA USER MANUAL 2. Set time zone. 3. Enable DST mode as required. 4. Set time. You may set time manually or enable NTP. 4.2 Video Configuration Camera Configuration includes five submenus: Camera Configuration, Video Stream, OSD Config, Video Mask and ROI Config. 4.2.1 Camera Configuration Setting steps: 1.Go to “Video Configuration” “Camera” interface as shown below. 2. You may adjust brightness, contrast, hue and saturation of the picture. 3. Select white balance mode. 4.
Page 11 IP CAMERA USER MANUAL 4.2.2 Video Stream Go to “Video configuration” “Video Stream” to see an interface as shown below. Three video streams can be adjustable. Resolution: The higher the resolution is, the clearer the image is. Frame rate: The higher the frame rate is, the more fluency the video is. However, more storage room will be taken up. Bitrate type: Including CBR and VBR. CBR means that no matter how changeable the video resources are, the compression bitrate keeps constant.
Page 12 IP CAMERA USER MANUAL You may set time stamp, device name and custom OSD here. Drag the time stamp and custom OSD to set their position. Then press the “Save” button to save the settings. 4.2.4 Video Mask You can set 4 mask areas at most. To set up video mask 1. Enable video mask and select mask color. 2. Click “Draw” button and then drag the mouse to draw the video mask area. 3. Click “Save” button to save the settings. 4. Return to the live to see the following picture.
Page 13 IP CAMERA USER MANUAL Clear the video mask: Go to video mask menu and then click “Clear” button to delete the current video mask area. 4.2.5 ROI Configuration To set up ROI 1. Go to ConfigROI Config menu. 2. Check “Enable” and then click “Draw” button. 3. Drag the mouse to set the ROI area. 4. Set the level. 5. Click “Save” button to save the settings. Now, you will see the selected ROI area is clearer than other areas especially in low bitrate condition.
Page 14 IP CAMERA USER MANUAL 4.3 Alarm Configuration Alarm configuration includes three submenus: Motion Detection Area, Motion Detection Trigger and Motion Detection Schedule. 4.3.1 Motion Detection Area 1. Go to “Alarm configuration” “Motion Detection Area” to see an interface as below. 2. Move the “Sensitivity” scroll bar to set up the motion trace sensitivity. 3. Check the “Add”, press the “Ctrl” button and move mouse to select the motion detection area.
Page 15 IP CAMERA USER MANUAL 4.3.3 Motion Detection Schedule Go to “Alarm configuration” “Motion Detection schedule” interface as shown below. Week schedule User could set the alarm time from Monday to Sunday for alarm everyday in one week. Add: Add the schedule for a special day. Erase: Delete holiday schedule. Day schedule You could set alarm time for alarm in some time of special day, such as holiday. 1.
Page 16 IP CAMERA USER MANUAL that day. Press the “Save” button to save the settings. Note: Holiday schedule is prior to Week schedule. 4.4 Network Configuration Network configuration includes eight submenus: Port, IP Address, Server Configuration, IP Notify, DDNS Config, RTSP, UPNP, Mail Setting and FTP. 4.4.1 Port 1. Go to “Network config” “Port” to see the interface as shown below. 2. Input port number for IE access in the “HTTP Port” textbox. 3.
Page 17 IP CAMERA USER MANUAL 2. There are two options for IP setup: obtain an IP address auto by DHCP protocol and use the following IP address. You may choose one of options as required. 3. Use the following IP address: display the IP address, subnet mask, gateway and DNS of the device. 4. PPPoE: User needs to manual input the user name and password for dial-up internet. Firstly, log in IE clients and then enter user name and password of PPPoE, save the setting and exit.
Page 18 IP CAMERA USER MANUAL 4.4.5 DDNS Configuration 1. Domain name Registration （http://provision-isr-dns.com） Note: DDNS is used to register for a hostname with DDNS username and password. Provision ISR now allows you to use our mint DDNS server in order to create a virtual address for your DVR/NVR/IP-Camera on the internet. Each account is limited to 35 different addresses using your preferred domain name address instead of using IP addresses.
Page 19 IP CAMERA USER MANUAL to provide an alternate domain name (please note: domain name is sometimes called host name). You can create up to 35 domain records under a single account 5) The domain name is added at the beginning of your DVR's address, for example the domain "home" will appear as home.provision-isr-dns.com. 1. Enter into "Network Configuration""DDNS Configuration" tab as below: Note: The steps to band a domain name for video surveillance server are as follows.
Page 20 IP CAMERA USER MANUAL Register dialog box Step 1: Fill in the blank of IE address with ‘www.dns2p.com’. Step 2: Click to enter the website. Step 3: Click "New User" in the right of homepage to register. For example: User ID is ‘abc’, and password is ‘123456’. The register dialog display as above. (2) Login Step 1: Return to homepage after registering successfully. Step 2: Click "Account Manager" on the right of homepage to login.
Page 21 IP CAMERA USER MANUAL 2. Setup in the IP-CAMERA ⑴ DOMAIN Domain is set in ‘1. Apply the Domain Name’. According to the example above, the domain is ‘WWW. IP-CAMERA.dns2p.com’. ⑵ USER ID Username of registered which is set in ‘(1) Register in the Web’. According to the example above, user ID is ‘abc’. ⑶ PASSWORD Password is set in ‘(1) Register in the Web’. According to the example above, password is ‘123456’. Note: If the connection fails, press the "INFO" button.
Page 22 IP CAMERA USER MANUAL Select “Enable UPNP” and then input friendly name. Then double click “Network” icon on the desktop of the PC to see an icon with the friendly name and IP address of the camera. You may quickly access the device by double clicking this icon. 4.4.8 Mail Setting Go to “Network Configuration” “Mail Setting” interface. 1. From Email: sender’s e-mail address. 2. User name and password: sender’s user name and password. 3. Server address: SMTP name of sender. 4.
Page 23 IP CAMERA USER MANUAL 1. Add: Click Add button to input FTP server’s server name, address, port number, user name, password, and upload path, click OK to confirm the setting. 2. Modify：Click this button to change some information of the FTP server. 3. Delete：Select certain FTP account; Click this button to delete this account. 4. Test ：Select certain FTP account; Click this button to test its validity. Please refer to the following table for parameters and instructions of FTP configuration.
Page 24 IP CAMERA USER MANUAL User Configuration Add User Note: After binding physical address to the IP-CAM, you can access the device on this PC in network only. If the MAC address was “00:00:00:00:00:00” which means it can be connected to any computers. 2. Input user name in “User Name” textbox (only letters). 3. Input characters in “Password” and “Confirm Password” textbox (letters or numbers). 4. Input the MAC address of the PC in “Binding MAC address” textbox. 5.
Page 25 IP CAMERA USER MANUAL Note: The default super administrator cannot be deleted. Parameter Meaning User Name User name to operate the logon client end User Type Type of users, normal user, advanced user and super administrator Binding MAC address The MAC addresses of user access the server which should set up according to actual MAC address of server. Password Password to log in the client terminal Confirm Password Password to log in the client terminal 4.5.2 Security Configuration 1.
Page 26 IP CAMERA USER MANUAL You can import or export the setting information from PC or to device. 1. Click “Browse” to select save path for import or export information on PC. 2. You can import or export all setting information to PC, but those two settings “User Configuration” and “Network Configuration” are exceptional. Default Configuration Click “Load default” button to restore all system settings to the default status. 4.5.
Page 27 IP CAMERA USER MANUAL 5 Mobile Surveillance This IP-CAM supports mobile surveillance by phones with Windows mobile, iPhone, Android and Blackberry OS. Please check the operation system version of mobile before use; and connect the IP-CAM to Internet. 5.1 Network Configuration Access device via LAN Step 1: Connect device via wireless router. Then checkmark DHCP both in router and device to automatically acquire IP address or enter the IP address manually.
Page 28 IP CAMERA USER MANUAL figure on the left. Step2: Search “Provision Cam” and click “Free” button as shown in the figure on the right. Step 3: Click “Install App” button as shown in the figure on the left. Step 4: Input iTunes Store password and then click “OK”. The software will be installed automatically. Install Software through PC Step 1: Install iTunes store in PC and then login. Step 2: Connect iPhone and PC. Step 3: Search and select “Provision Cam”. Step 4: Click “Download” button.
Page 29 IP CAMERA USER MANUAL 3G, normal video quality compared to the former network type. Step 2: Input server, account and password. Server: WAN IP address (or domain name) plus HTTP port of the device. For example: 210.21.183:89 or 123.dvrdydns.com:89. Note: The default http port of the device is 80. If modified, use the modified port. Account and Password: The login account and password of the device. The default account is admin and the default password is 123456.
Page 30 IP CAMERA USER MANUAL ： Open/Close audio. Choose the channel and click this button to open/close the audio of this channel. ：Open/Close talk. Click this button to pop up the servers which support talk function. Select the device to start talking. ：Set video parameter button. Select the channel and click this button to set the video parameters including brightness, hue, saturation and contrast. ：PTZ button. Click this button to pop up PTZ control panel.
Page 31 4. IP CAMERA USER MANUAL Live Preview Once you access the device, the system will automatically display the screen mode in accordance with the channel number of the device Note: The maximum number of channels which can be connected are nine after login. 1. Click “Screen mode” button to select channel as shown in Fig 1. 2. When there is video playing in a screen, you can switch the channel by long pressing the screen as shown in Fig 2. 3.
Page 32 IP CAMERA USER MANUAL Fig 4 5. CMS Function This function makes multi-device managements and preview come true. Step 1: Click to enable CMS function. When this icon turns green, it means this function is enabled. Step 2: Click to choose channel as shown in the right picture. After you choose the channel, click “ok”, the system will display the related image automatically. If channels have been added into the group, you can see the images by clicking the group name.
Page 33 IP CAMERA USER MANUAL Enable CMS function and enlighten the group to save the favorite groups as shown in the following picture on the right. Then click button to play. Only one favorite group can be collected. ：Color means the channel or group has been collected. Grey means the channel or group isn’t collected. 7. Playback Interface Click “Playback” button to enter the playback interface. Then click “Search” button to search the file. To play the record by click this file name. 8.
Page 34 IP CAMERA USER MANUAL Step 3: Press “Install” button. Step 4: Install the software subject downloading is done, the software automatically to the notes. Once the will install Login Menu Step 1: Configure the network of mobile phone. your device and Step 2: Input the WAN IP address/domain name and port of your device in the sever column. The port should be HTTP port of your device. The default http port of the device is 80. If you have changed your http port, please enter the new port here.
Page 35 IP CAMERA USER MANUAL Record Playback: Click “Playback” in the main menu interface to enter playback interface. Then choose the channel you want to playback. This will take you to see the record file. Click this file to play. Pause/Play Stop Forward Backward Server List: In the main menu interface, click “Server list” to see the above picture on the left hand. Add Server: Click button to pop up a window as shown in the above picture on the right hand.
Page 36 IP CAMERA USER MANUAL channel and storage. Favorite Channel: Check the favorite channels and click “Save” button to save these channels. Then go into live interface and click button to play these favorite channels. Storage: Setup the relevant parameters of mobile video. Information View: view the DVR/NVR basic information as shown in the picture on the right. 6 IP-Tool Updating through IP-Tool Note: Do not cut off power supply and internet when updating.
Page 37 IP CAMERA USER MANUAL When upgrading the software and kernel, the IP address of PC and device should be at the same network segment. If the network segment is different, user should change the IP address by right clicking the device and then select “network setup”. Modify IP address dialog box will appear as follows: Modify IP address and click OK button to exit the dialog box. After that, IP-Tool will display the new IP address.
Page 38 IP CAMERA USER MANUAL After finishing upgrading, a massage box will pop up as below: Click OK button to exit the update dialog box, and then the device will restart automatically. Select the device and right click it to select “Update kernel”. This will bring up a dialog box as below: Input the relevant information and click “Browse” button to choose your update file. After that, click “Update Kernel” button to start updating.
Page 39 7 IP CAMERA USER MANUAL Q &A 1. Q: How to find my password if I forget it? A：Hold and press the default hole with spicula to reset. Default IP: 192.168.226.201 User name: admin Password: 123456 2. Q：Fail to connect devices through IE browser, why? A: Network doesn’t connect well. Please check the connection and make sure it connected well. B: IP is not available. Reset the valid IP. C: Web port number has been revised: contact administrator to get the correct port number.
Page 40 IP CAMERA USER MANUAL Fig 4-1 Fig 4-2 ④ then click ok to finish setup. b. Other plug-ins or anti-virus blocks ActiveX. Please uninstall or close them. 5. Q：No sound can be heard, why? A：Without connect audio input device. Please connect and try again. B: Without enable audio function at the corresponding channel. Please check AUDIO item to enable this function. 6. Q：Why doesn’t the device connect to wireless? A: Check the statues of wireless router.
