Datasheet

MAC Address
The MAC Address should be given on the format XX:XX:XX:XX:XX:XX.
SendClock
The send clock factor is the number to multiply with 31,25 µs that results in the send clock. A send
clock factor of 32 will give a send clock of 1 ms.
ReductionRatio
Reduction ratio applied to the send clock to form the send cycle time. A send clock factor of 32 and
a reduction ratio of 32 will give send cycle time of 32 ms.
Phase
In case of a reduction ratio greater than one this property can be used to distribute the network
traffic more evenly. E.g. For reduction ratio 3 (phase can be between 1 and 3): if phase is one, data
will be sent on 1., 4., 7., etc. controller cycle (defined by the send clock). I phase is 2, it is sent on
2., 5., 8., ... cycle. Finally if phase is 3, data will be sent on 3., 6., 9., ... cycle.
ByteOrdering
Byte ordering of the device.
DeviceInfo
Information about the device as defined in the gsdml-file.
Device
Definition of the device.
DAP
The device access point is always defined on slot 0. Device-specific data is defined in it.
Slot1 - Slotx
A device can have one or several slots. The configurator will show you how many slots that can be
configured. For each slot you need to configure some things.