Datasheet

Module
A slave can handle one or several modules. There are modulare slaves with one single module,
where the slave and the module constitutes on unit. and there are slaves of rack type, into which a
large number of modules can be inserted. The Profibus configurator displayes on map for each
module that can be configured for the current slave.
Each slave is given an object name, e.g. M1 M2 etc. Modules on the same slave has to have
different object names.
Also the module type is stated. This i chosen from a list of moduletypes supported by the current
slave. The list is found below Type.
Fig Module Type and Class selected
When the type is chosen, the parameter of the selected moduletype is configured under
UserPrmData.
You also have to state a class for the module object. At the configuration, a module object is created
for each configured module. The object is of class Pb_Module or a subclass of that class. Under