5’’ /17’’/19’’ TFT LCD MONITOR USER’S GUIDE V513/V713/V913 (SP516/SP716/SP916)
©2006 by Proview®. All rights reserved. Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory judicial law or hereinafter granted, including without limitation, material generated from the software programs which are displayed on the screen such as icons, screen displays, looks, etc. All Proview® product names mentioned in this publication are trademarks of Proview. Other company trademarks are also acknowledged.
ENGLISH CONTENTS Table of Contents CE Marking Declaration Of Conformity ..............................................................4 Federal Communications Commission (FCC) Statement .................................5 Important Safety Instructions..............................................................................6 Chapter 1 Introduction Features ................................................................................................9 Package Contents .................................
ENGLISH RECYCLING PLACE Recycling Place EUROPE When disposing of Proview Monitors in Europe, please contact one of the following three locations to make arrangements for recycling. Proview International (UK) Limited 30 The Avenue, Watford, Hertfordshire WD17 4AE United Kingdom Timothy Lo Tel: +44-1923-248-111 Fax: +44-923-248-222 Email: tim.lo@proview.co.uk PGL Europe B.V.
ENGLISH FCC/CE CE Marking Declaration Of Conformity This LCD monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and 73/23/EEC “Low Voltage Directive” as amended by Directive 93/68/EEC. The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the buildings.
ENGLISH FCC/CE Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits of a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
ENGLISH IMPORTANT SAFETY INSTRUCTIONS Important Safety Instructions To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. Warnings 6 • Do not place the equipment on any uneven or unstable carts, stands, tables, shelves etc.
ENGLISH Do not attempt to service the equipment yourself. • Opening and removing the covers may expose you to dangerous voltage or other hazards and may void your warranty. Refer service to qualified personnel. • Always remove the power cord from the outlet before cleaning the equipment. • Never use liquid or aerosol cleaners on the equipment. Clean only with a soft dry cloth. • Do not expose the equipment to extreme temperature or to direct sunlight, as the equipment may heat up and suffer damage.
ENGLISH IMPORTANT SAFETY INSTRUCTIONS DISPOSAL OF WASTE ELECTRONIC EQUIPMENT BY PRIVATE HOUSEHOLDS WITHIN THE EUROPEAN UNION This sign indicates that this product may not be disposed of with your regular household waste. The recycling and separate collection of such products is your responsibility. Please drop off the above-mentioned waste at a designated place for recycling waste electrical and electronic equipment.
ENGLISH INTRODUCTION INTRODUCTION Features • FAST VIDEO RESPONSE Fast action media such as gaming, DVD and video conferencing will playback smoothly thanks to the fast video response time of the LCD panel. • HIGH CONTRAST RATIO Colors will appear vibrant and lifelike producing superior image quality. • ANTI-REFLECTIVE COATING Special panel coating to efficiently reduce distracting glare on images viewed. • PLUG-AND-PLAY CAPABILITY Easy trouble-free configuration and set-up.
ENGLISH INTRODUCTION Package Contents Make sure all of the following contents are included in the box. If any items are missing, please return this product to the original place of purchase.
ENGLISH INTRODUCTION Front View and Controls V513/V713/V913 3 MENU/ENTER MENU/ENTER DOWN UP DOWN UP AUTO AUTO 1 4 2 5 SP516/SP716/SP916 3 MENU MENU AUTO ITEM MENU ENTER ▲▼ LED 1 4 2 5 DESCRIPTION Press once to display the OSD (On Screen Display). And press to activate the items you highlight . In OSD mode, press the ▲▼/DOWN/UP buttons to move DOWN/UP the selection highlight to the next menu item counterclockwise or clockwise, respectively.
ENGLISH INSTALLATION INSTALLATION Refer to the owner’s manual of the computer for connections. In the process of connecting external equipment, do not connect any AC power cords to wall outlets until all other connections are completed. Connecting Your LCD Monitor to a Computer Turn off the computer and unplug the power cord. Connect the signal cable to the VGA port on the back of the computer. Connect the power cord to wall outlet and LCD monitor.
ENGLISH NOTE: INSTALLATION The button is used for switching the LCD monitor on and off, it does not disconnect the device from the main voltage. To completely disconnect the main voltage, please remove the power plug from the socket. NOTE: The LED indicator is green when the monitor operates normally and will turn to amber when in power saving mode. When the monitor is off, the LED turns dark. Installing Your LCD Monitor Follow the instructions below to set up and install the monitor.
ENGLISH INSTALLATION In order to ensure a healthy and relaxed body position when using the monitor at visual display workstations, you are able to adjust the monitor’s angle of the stand. The angle of the LCD monitor may be adjusted approximately 30 degrees.
ENGLISH OSD MENU OSD Menu Using the OSD Menu To create the best picture, your LCD monitor has been preset at the factory with the Preset Mode Timing shown on page 19. The OSD (On Screen Display) Menu allows the user to adjust various settings and options by following the steps below. Press the MENU button to display the OSD. The OSD main menu provides an overview of the selection of controls available. BRIGHTNESS Press the ▲▼ or DOWN/UP button to highlight the desired icon.
ENGLISH The OSD Options OSD MENU The OSD menu includes the following options: BRIGHTNESS O BRIGHTNESS Controls the overall brightness. CONTRAST Controls the difference between the brightest and darkest regions of the picture. H. POSITION Adjusts the position of the picture left and right in the window. V. POSITION Adjusts the position of the picture up and down in the window. H.SIZE Adjusts the width of the picture. PHASE Adjusts signal phase, which can improve focus clarity and image stability.
ENGLISH OSD MENU COLOR Allows selection of the general color tint: Select User Mode, WARM, or COOL. RED COOL WARM Select User Mode Allows the user to adjust red, green and blue color component levels independently. COOL Inclines colors toward the blue end of the spectrum. Fixes the red, green and blue component levels at factory settings; they cannot be independently adjusted. WARM Inclines colors toward the red end of the spectrum.
ENGLISH OSD MENU OSD Changes the position of the OSD. H. POSITION Moves the OSD left and right in the window. V. POSITION Moves the OSD up and down in the window. EXIT Exits the OSD menu. EXIT Exits the OSD.
ENGLISH TECHNICAL INFORMATION Technical Information Preset Mode Timing Chart The screen image has been optimized during manufacture for the display modes listed below. Video signal: (IBM PC/AT) Dot X Line Horizontal Frequency(kHz) Vertical Frequency(Hz) 720 x 400 31.47 70.00 640 x 480 31.47 60.00 37.86 72.80 37.50 75.00 35.16 56.25 37.88 60.30 48.08 72.20 46.87 75.00 48.36 60.00 56.48 70.10 60.02 75.00 63.98 60 79.
ENGLISH TECHNICAL INFORMATION 20 D-SUB Connector PIN Assignment 1 6 5 10 11 15 PIN LCD Monitor User’s Guide DESCRIPTION 1 Red 2 Green 3 Blue 4 Ground 5 Self Test 6 Red Ground 7 Green Ground 8 Blue Ground 9 5 VDC 10 Ground 11 Ground 12 SDA (FOR DDC) 13 H. Sync 14 V.
ENGLISH TECHNICAL INFORMATION Plug and Play This monitor conforms to the VESA DDC (Display Data Channel) standard, which means that when it is used with a DDC compatible video card, the monitor is easier to set up. With VESA DDC 1/2B, when the monitor is turned on, it will automatically notify a windows 9X/2000/XP host computer of its scanning frequencies, capabilities and characteristics.
ENGLISH TECHNICAL INFORMATION Troubleshooting Before consulting service personnel, check the following chart for a possible cause and solution to the trouble you are experiencing. Monitor will not turn on • Make sure the power cord is plugged in. No picture • Make sure the power cord is plugged in. • Check the signal cable connecting the LCD monitor and the computer (refer to page 12). • Press the button on the front panel of the monitor.
ENGLISH TECHNICAL INFORMATION Specifications MODEL LCD Panel V513 V713 V913 Panel Size 15” TFT LCD 17” TFT LCD 19” TFT LCD Brightness 250 260 280 Contrast Ratio 500:1 500:1 500:1 Dot Pitch 0.297mm x 0.297mm 0.264mm x 0.264mm 0.294mm x 0.294mm Max.
