User's Manual

Pro Video instruments
VeCoder Ultra IP Series H264 Encoder
3
MANUALS & TECH SUPPORT
Latest Manuals & Software are always available on our specific website www.quickinstallnow.com to access,
use the 3 letters prefix + the UPC number on the serial number label on the product. You can also scan the QR
Code on the label to access directly.
Free Unlimited Tech support over the phone is always available Mon-Fri 9 am / 4 pm EST US.
For troubleshooting or questions please open a Ticket on our site pvisupport.com
Your Satisfaction is top priority and most important for us.
LOGIN TO THE UNIT
The FACTORY DEFAULT IP address is 192.168.1.168
The Login is:
User = admin
Password = admin
You can reset the VECODER by pressing for 20 seconds the reset button located on the rear panel to access,
make sure your computer is set to a STATIC IP ADDRESS as 192.168.0.100 See the PC SETTINGS instruction below
in this manual
This will default the modules IP settings back to default of 192.168.1.168
PARAMETERS & CUSTOMIZATIONS
Each unit is ready to work plug n play by default. If you order a Unit with Multiple Modules preinstalled we set
each module to have its own IP address to ensure you don’t create conflicts in your network.
You may customize the unit parameters to fit your application and needs. The unit comes with 4 independent
Video Encoder Engines, each capable to output 5 different protocols ( RTMP / HTTP / RTSP / UDP / HLS ), Video
Scaling, H264 video, AAC or MP3 Audio Formats, FIVE CG Logo Generators, frame rate controls, etc.