User's Manual

Pro Video instruments

VeCoder Ultra IP Series H264 Encoder

HDMI INPUT 1-4

Here you can set your settings for the Main Stream of your HDMI input. You can enable and disable different

formats you wish to use as well as Bitrate, FPS, Encoding Size, and Compression Profile. You may adjust these

settings to your needs. Below are our recommend defaults. Please set your unit all up and then power cycle the

unit to ensure the settings take effect. The Same settings can be done in the Other Streams but not nessacry

unless you wish to use a specific format and require special settings such as lower bitrate or frames for that

specific application.

NOTE: If the unit starts slowing down or the CPU usage is too high under the status page, please disable any

formats you are not using or Factory Reset the Unit under the Systems Tab.

Note that the IP address will change back to the default 192.168.1.168