User Manual

Pro Video Instruments

Vecoax Compact RF series modulator Manual

NOTE: BEFORE INSTALLATION

Please test each unit with your TV’s before installing your units to

ensure you are receiving signal. This makes troubleshooting easier

epesically for the Blade and Rack series of this Product.

This can be done simply by connecting your TV with a short piece of

Coax cable to the RF out of the Unit. No HDMI needs to be Connected.

This will display our PVI logo on your TV.

By default our unit is set to QAM(J.83B Cable) Mode.

This can be changed by refering to our QUICK GUDIE below.

Depending on your supported TV standards, scan for Digital channels.

Please refer below for our QUICK GUIDE to setting up your Device for

your application and needs.