User Manual

Pro Video Instruments
Vecoax Compact RF series modulator Manual
9
DVB-T GENERIC – PLEASE REFER TO YOUR LOCATION NEEDS
These are the Defaults and
Good starting point for PLUG
N PLAY setup.
If you have more than one
unit, please ensure you
change the FREQUENCY and
LCN so they don’t overlap and
create issues.
• ADVANCE – Advance
options for users who
require Specific PID’s or
Fixed EDID information.
Please don’t change
these unless you
understand your
required PID’s or EDID
per Cable Provider
instructions or PVI Tech
Support request.
• SOURCE – Set your Video Source HDMI,
CVBS, or SDI depending on your model
• STANDARD – Set your TV standard
depending on your needs, location, and
support format of your TV.
• FREQ – Set your Frequency using our
Frequency chart listed at the end of the
manual. TV’s will scan for the Frequency and
the Frequency Channel it relates to first
before being stored using the LCN
• BW – Bandwidth can be changed for your
regions requirements.
EU/NEW ZEALAND = 8 MHz
AUSTRALIA = 7 MHz
COLOMBIA\PANAMA = 6 MHz
• VID QUALITY – Set the Latency Mode of
your Video.
• MOD – Modulation Mode which you can set
to match your region’s needs.
• FTT – Fast Fourier Transform can be set here
depending on your needs and region. This
controls number of carriers per a given
bandwidth
• GI – Guard interval can be set here
• CR – code rate which controls carrier to
noise ratio
• LCN – logical channel number can be set
here. This is the channel number that will be
stored and displayed on the TV
• SERVICE NAME – Name of the Channel you
wish to use. 4-6 Characters max depending
on TV.
• AUDIO – Default is MPEG