Installation Guide

7
4. 
A. Cut the horizontal spacers

snuggly inside the vertical
frame channels.
D. In the bottom channel
apply two beads of
sealant the full length of

each side.
E. Place a glass block in the
side channel and slide it
into the bottom channel.

sealant behind the raised
edge of glass block.
G. Press a vertical spacer
into place next to the
block.

of sealant behind the
raised edges of the
next glass block to be
inserted.
I. Insert sealant side of
next block tight against
the vertical spacer and

of sealant behind the
raised edge of block.
C. Sealant will skin over
in 15-17 minutes. Do
not apply sealant to
more blocks than can be
installed in 10 minutes.
B. Open the sealant as
instructed on the tube.
Cut the nozzle at a 45°

4D
4F
4G
4 I