Installation Guide
4C
Grout Finishing
IMPORTANT:
Sanded acrylic polymer
or urethane based sanded
grout suitable for use on
ceramic, porcelain, or glass
tiles MUST be used.
E. After the grout has cured for 72 hours, caulk all
perimeter joints with a bead of sealant.
CAUTION:
coat is dry.
Avoid contact with skin. Safety glasses and impervious
gloves are recommended to minimize skin and eye
C. For applications in humid
environments, wait 72 hours
and apply sealer to the grout
lines with a paint brush.
glass surfaces to prevent it
from adhering to the glass.
B. Follow directions on the Surface Grout container
for grout application.
A. Remove any sealant squeezed out from the joints
with a utility knife.
Do not finish the joints until
sealant has cured for 24-48 hours
25