Installation Guide
15
B. For walls with curves and/or angles it is recommend-
wall before constructing a curb.
C. Make sure the curved and/or angled sections of your
D. The curb must be as wide as,
or wider than, the glass block
thickness.
curb. If installing the glass blocks
in a wet environment, take
steps to ensure that the curb is
waterproofed.
F. Use a level to make sure the
opening is level and plumb.
G. Verify all measurements. Remember, for rough
H. If there are any problems with the opening or curb,
adjust it before proceeding.
Series/Collections:
Block Shapes Series/Collection
AllBend™ 22.5
o
4” and 80mm
90
0
Radius Corner 4” and 80mm
90
0
Sharp Corner 4” and 80mm and MYMINIGLASS™
Endblock
™
4” and 80mm and MYMINIGLASS™
Double End
™
4” and 80mm and MYMINIGLASS™
TRIDRON
®
45
o
4” only
1C
TRIDRON
®
45°
Curb Layout
AllBend™ 22.5°
Curb Layout
1F
Support Wall
Support Wall