Technical Specifications

PROVA-SEAL – PBS10FLOZCDN - WHITE EFFECTIVE DATE: MARCH 3, 2015
PAGE 4 OF 10
8. EXPOSURE CONTROLS - PERSONAL PROTECTION (Continued)
PROTECTIVE EQUIPMENT (continued):
Respiratory Protection: Maintain airborne contaminant concentrations below exposure limits listed above, if applicable. For materials
without listed exposure limits, minimize respiratory exposure. If necessary, use only respiratory protection authorized under
appropriate regulations. Oxygen levels below 19.5% are considered IDLH by U.S. OSHA. In such atmospheres, use of a full-
facepiece pressure/demand SCBA or a full facepiece, supplied air respirator with auxiliary self-contained air supply is required under
U.S. OSHA’s Respiratory Protection Standard (1910.134-1998).
Eye Protection: Wear splash goggles or safety glasses as appropriate for the task.
Hand Protection: Wash hands and wrists before putting on and after removing gloves. During manufacture or other similar operations,
wear the appropriate hand protection for the process. Use double gloves for spill response, as stated in Section 6 (Accidental
Release Measures) of this SDS. Because all gloves are to some extent permeable and their permeability increases with time, they
should be changed regularly (hourly is preferable) or immediately if torn or punctured. If necessary refer to appropriate regulations.
Skin Protection: Use appropriate protective clothing for the task (e.g., lab coat, etc.). If necessary, refer to the U.S. OSHA Technical
Manual (Section VII: Personal Protective Equipment) or other appropriate regulations. If a hazard of injury to the feet exists due to
falling objects, rolling objects, where objects may pierce the soles of the feet or where employee’s feet may be exposed to electrical
hazards, use foot protection, as described in U.S. OSHA and Canadian Standards.
9. PHYSICAL and CHEMICAL PROPERTIES
FORM: Paste. COLOR: White to off-white.
MOLECULAR FORMULA: Mixture. MOLECULAR WEIGHT: Mixture.
ODOR: Mild ODOR THRESHOLD: Not available.
FLAMMABLE LIMITS (in air by volume, %): Not applicable. OXIDIZING PROPERTIES: Not applicable.
DECOMPOSITION TEMPERATURE: Not available. PERCENT VOLATILE: Not available.
AUTOIGNITION TEMPERATURE: Not available. FLASH POINT: >212°F
FREEZING/MELTING POINT: Not available. BOILING POINT: Not available.
VAPOR PRESSURE: Not available. pH: N/A
SPECIFIC GRAVITY (water = 1): 1.38 BULK DENSITY: Not available.
VAPOR DENSITY (air = 1): Not available. EVAPORATION RATE (n-BuAc = 1): > 1
SOLUBILITY IN WATER: Insoluble SOLUBILITY IN SOLVENTS: Readily
COEFFICIENT WATER/OIL DISTRIBUTION: Not established.
HOW TO DETECT THIS SUBSTANCE (warning properties in event of accidental release): The appearance may be
characteristics to distinguish a release of this product.
10. STABILITY and REACTIVITY
CHEMICAL STABILITY: Stable when properly stored at recommended temperature (see Section 7, Handling and
Storage).
DECOMPOSITION PRODUCTS: Combustion: If exposed to extremely high temperatures, thermal decomposition may
generate irritating fumes and toxic gases (e.g., calcium, carbon, tin, titanium and nitrogen oxides, ammonia, styrene,
formaldehyde and acrylic monomers). Hydrolysis: None known.
MATERIALS WITH WHICH SUBSTANCE IS INCOMPATIBLE: This product is incompatible with strong oxidizers.
POSSIBILITY OF HAZARDOUS POLYMERIZATION OR REACTION: Will not occur.
CONDITIONS TO AVOID: Avoid exposure to or contact with extreme temperatures and incompatible chemicals.
11. TOXICOLOGICAL INFORMATION
SYMPTOMS OF EXPOSURE BY ROUTE OF EXPOSURE: The health hazard information provided below is pertinent to
employees using this product in an occupational setting. The following paragraphs describe the symptoms of exposure
by route of exposure.
Inhalation: Due to viscosity, inhalation is not a significant route of exposure. Vapors or fumes when used in an enclosed space, if
heated or during curing may cause irritation of the respiratory system. Symptoms include nose irritation, dry or sore or burning
throat, runny nose, shortness of breath.
Contact with Skin or Eyes: Direct eye contact may cause irritation, redness, and tearing from mechanical irritation. Prolonged or
repeated skin exposures may cause dermatitis (dry red skin).
Skin Absorption: Some trace components can be absorbed through intact skin. Unless contact is prolonged and covers a large area of
skin, no significant adverse effects is expected.
Ingestion: Ingestion is not a significant route of occupational exposure and is unlikely to occur. If this product is swallowed, irritation of
the mouth, throat, esophagus and other tissues of the digestive system may occur. Symptoms of ingestion may include nausea,
vomiting, and diarrhea.
Injection: Accidental injection of this product, via laceration or puncture by a contaminated object can cause redness at the site of
injection.
HEALTH EFFECTS OR RISKS FROM EXPOSURE: An Explanation in Lay Terms. Exposure to this product may cause
the following health effects:
Acute: Inhalation of fumes or vapors may cause irritation of respiratory system. Eye contact may cause irritation.
Chronic: Prolonged or repeated skin exposure may cause dermatitis (dry red skin).
TARGET ORGANS: Acute: Skin, eyes, respiratory system. Chronic: Skin.