SDS

PROVA-SEAL Page 1 4/25/2017
Surface Preparation:
 For best results surfaces should be dry. However PROVA-SEAL may be applied over
slightly damp substrates. Do not apply over standing or running water. Substrates
should be free of dirt, dust, oil, mildew, loose paint, old caulk or other contaminates.
 Only apply when sealant surface and air temperature are above 40°F and rising.
 Do not apply on surfaces that exceed 100° F or when rain is expected.
Application:
 Remove cap if required, cut nozzle at 45° angle and puncture inner foil seal.
 Apply PROVA-SEAL to all joints, inside corners, butt joints and seams.
PROVA
-
SEAL™ Sealing and Bonding Compound - White
 Rapid Cure & Water Ready in 1 Hour
 Paintable in 30 Minutes
 Durable Air-Tight, Waterproof Seal
 Interior / Exterior
 Highly Elastic
 Waterproof/Crack-proof
 Low odor / Low VOC
 Does not contain any – Isocyanates – Phthalates - Dibutyl Tin Compounds.
Product Description: Product Description: PROVA-SEAL™ Sealing and Bonding Compound is a single
component, waterproof sealing and bonding compound is a premium hybrid silicone sealant. PROVA-SEAL can be
used to waterproof pipe and valve protrusions in the PROVA-SHOWER SYSTEM and for use with PROVA-BOARD.
PROVA-SEAL is required to bond and seal the components of the PROVA-SHOWER System. PROVA-SEAL can be
used to bond to building elements such as bathtubs, windows and door frames. PROVA-BOARD can be attached with
PROVA-SEAL in various applications, such as countertops, partitions, and other building elements. Once cured,
PROVA-SEAL provides a watertight, flexible seal. The cured product will not crack, crumble or shrink and adheres to
most common construction materials; wood, metal, vinyl siding, masonry, concrete, brick, tile, plastic, drywall/plaster,
glass and painted surfaces. Once applied, PROVA-SEAL can be painted in 30 minutes and exposed to water in 1
hour.
Suggested Uses:
Caulks and seals cracks, joints and seams around the following:
 PROVA SHOWER SYSTEM
 Sinks and Counters
 Hardboard and Flashing
 Penetrations
Substrates include, but not limited to:
 Masonry  Brick  PVC
 Concrete  Marble  PROVA-SHOWER SYSTEM Components
 Porcelain  Ceramic Tile  Metals; Stainless Steel, Copper, Galvanized and Aluminum
 Wood  Glass
Performance Characteristics:
 Meets ASTM Specification C-920, Type-S, NS Class 25, use NT, M, G, A & O.
 Meets Fed. Spec. TT-S-00230C and TT-S-001543A.
 Provides a flexible durable seal.
 Paintable
For more information please contact
1-800-565-6653
www.provaproducts.com