Certifications 2

Shenzhen Anbotek Compliance Laboratory Limited
Page 2 of 8 Report No.SZABB180103002-46
This Test Report is issued by the Company subject to its General Conditions of Service printed overleaf. Attention is drawn to the limitations
of liability, indemnification and jurisdictional issues defined therein. The results shown in this report refer only to the sample(s) tested unless
otherwise stated. This Test Report cannot be reproduced, except in full, without prior written permission of the company.
Shenzhen Anbotek Compliance Laboratory Limited
Address: East of 4/F., Building A, Hourui No.3 Industrial Zone, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China
Tel: [phone] Fax: [phone] Email: [e-mail] Http: //www.anbotek.com.cn
MATERIAL SAFETY DATA SHEET
Section 1. Chemical Product and Company Identification
Products Name: Jump Starter
Model Number: Epower-93,Epower-93A,Epower-93C,Epower-109A,Epower-109B
Rating: Nominal Voltage: 11.1V
Rated Capacity:2000mAh, 22.2Wh
Weight: 1.28kg
Manufacture Name: Shenzhen Carku technology Co., Ltd.
Address: 2nd Floor A,Block A,Tongsheng Technology Building Huahui Road,
Longhua New District, Shenzhen, China
Tel: [phone]
Fax: [phone]
E-mail:[e-mail]
Section 2. Composition/Information on Ingredients
Substance/preparation: preparation
Chemical Name
Percent of Content
CAS No.
Lithium Cobalt Dioxide
(LiCoO
2
)
25%~35%
12190-79-3
Graphite (C)
15%~20%
7782-42-5
Poly Vnylidene
Fluoride (PVDF)
1%~5%
24937-79-9
Acetylene Black
0.5%~3%
1333-86-4
Aluminum(AL)
21%~23%
7429-90-5
Copper(Cu)
10%~11%
7440-50-8
Electrolyte
10%~15%
623-53-0/ 21324-40-3