User manual

ManualsBrandsPROUSER ManualsBattery Charging & MaintenanceBattery status indicator, Battery monitor Mikroprozessor Ladegerät Bluetooth 7,5A /I

FROST-Mode:

If ambient temperatures are very low, a higher voltage is recommended to

charge a battery. The FROST-Mode has to be selected in combination with

the above mentioned charging modes and will increase the charging voltage

as follows:

FROST-Mode + Truck-Mode: increased charging voltage: 29.4V

FROST-Mode + Car-Mode: increased charging voltage: 14.7V

Do not use this setting for maintenance charging when temperatures are

above 5°C.

Switch Mode Power Supply

: EXPERT-MODE

(Only to be used by qualified persons! Exercise extreme caution!)

Note:

A long press (3 sec.) of the Mode-button

with no connected battery

needed to be able to select this mode.

voltage: 13.6V current: up to 5.0A

In this mode the charger can be used as a power supply: for example to

preserve the car´s data, while changing the battery.

Please be very careful not to short-circuit the output cables,

when this mode is activated. There will be no short-circuit

protection or protection from sparks.

Advanced AGM-Mode:

voltage: 15.0V charging current: up to 7.5A

Suitable for Special-AGM batteries (mostly Calcium-batteries) that require a

higher charging voltage – always check the specifications of your battery

before using this mode.

LITHIUM-Mode:

voltage: 12.8V charging current: up to 3.75A

Suitable for 4-cell-LiFePO4 only !

Note:

If the voltage of the battery is not 11.6V - 13.8V, the LITHIUM-Mode

is not available. A long press (3 sec.) of the Mode-button is needed to be able

to select this mode.

RECOVER-12V-Mode:

voltage: 14.7V charging current: up to 7.5A

(suitable for 12 V lead-acid batteries with a capacity greater than 18 Ah)

Select this charging mode to recover and charge a deeply discharged or

sulphated 12V battery using pulse charging.

Note:

A long press (3 sec.) of the Mode-button is needed to be able to

manually select this mode.

WARNING:

Never use this mode with Lithium-batteries. Please read the

instructions of your battery manufacturer.

Digital Display:

Shows voltage and current of the selected charging mode and the connected

battery