SDS
  Page 1 of 3 
SAFETY DATA SHEET 
    PVC Siding   
Product:  PVC Siding 
Common Name: Vinyl Siding 
Manufacturer: KP Building Products   KP Building Products, Ltd 
   820 Highway 7 N,     323 RR#3 Main Street North 
  Holly Springs 38635  Acton, Ontario L7J 2L9  
     (662) 252-9991     (519) 853-1230 
Product Use: Building Material 
Emergency Tel.: 1-802-865-0114 
This product is not expected to create any unusual emergency hazard under normal conditions of use. It is solid, non-
reactive and non-combustible material. 
Routes of Exposure: Inhalation, eye and skin contact. 
Inhalation:   Dusts created by drilling, cutting or grinding may cause irritation of respiratory tract. 
Eyes:     Possible irritation of the eye during drilling, cutting or grinding of the product. 
Skin:     Not expected under normal conditions of use. 
Ingestion:   Not a likely route of entry. 
Vinyl siding is a PVC produced product and the formulation has a proprietary KP Ultra-Vinyl formula. 
Inhalation:   Immediately remove the affected victim from exposure. Keep at rest. Call for prompt medical 
  attention if symptoms persist. 
Eye Contact:   Flush eyes with large amounts of water until irritation subside. Do not rub or scratch your eyes. 
  If irritation persists, get medical attention. 
Skin Contact:   Not a normal route of harmful exposure. 
Ingestion:   Not a normal route of exposure. 
Extinguishing Media: Use any media suitable for surrounding fire. 
Equipment/Instructions: Firefighters should wear self-contained breathing apparatus and protective clothing. 
  Do not release contaminated water into soil or drains. 
Hazardous Combustion Products: The decomposition products may include and are not limited to carbon dioxide and 
  monoxide, chlorine etc. The product should not be burnt as construction waste. 
 Containment Procedure: Not applicable. 
 Clean-up Procedure:  Before attempting clean up, refer to hazard data given above. Sweep up material 
   (without raising dust) and collect into an appropriate container for disposal.  
   Rinse area with water. Prevent large spills from entering sewers or waterways. 
1.
IDENTIFICATION
2.HAZARD IDENTIFICATION
3.COMPOSITION/INFORMATION ON INGREDIENTS
4.FIRST
-
AID MEASURES
5.FIRE
-
FIGHTING MEASU
RES
6.ACCIDENTAL RELEASE MEASURES



