Installation Instructions

6
Measure the height at the center. Measure the width.
Do not deduct for doors and windows. Do this for each gable to
receive siding. Multiply the results by .75 (75%).
Gable 1: ________(width) x ________(height) x .75 = ________sq. ft.
Gable 2: ________(width) x ________(height) x .75 = ________sq. ft.
Gable 3: ________(width) x ________(height) x .75 = ________sq. ft.
Gable 4: ________(width) x ________(height) x .75 = ________sq. ft.
Gable 5: ________(width) x ________(height) x .75 = ________sq. ft.
Gable 6: ________(width) x ________(height) x .75 = ________sq. ft.
Total: ________sq. ft.
Measure the height of the dormer. Measure the width.
Multiply the results by .75 (75%). Multiply the results by 2 to take
off both sides of each dormer. Do this for each dormer.
Dormer 1: ________(h x w) = _________x .75 (x 2) = ________sq. ft.
Dormer 2: ________(h x w) = _________x .75 (x 2) = ________sq. ft.
Dormer 3: ________(h x w) = _________x .75 (x 2) = ________sq. ft.
Dormer 4: ________(h x w) = _________x .75 (x 2) = ________sq. ft.
Dormer 5: ________(h x w) = _________x .75 (x 2) = ________sq. ft.
Dormer 6: ________(h x w) = _________x .75 (x 2) = ________sq. ft.
Total: ________sq. ft.
gable surfaces
dormer surfaces