Installation Instructions

10
Undersill
Trim
Vertical Base
Vertical 10”
Inside Corner
Post
Outside
Corner Post
Starter Base
J-channel
F-channel
10” Soffit
(Plain and Perforated)
Fascia
Window/Door Cap
Horizontal Siding
general installation tips
Before you begin:
This instruction sheet has been specially written to provide you with a simple, straightforward, step-by-step
guide for installing your ABTCO
™
vinyl siding. In fact, the best installation advice we can give is that you read
through these instructions carefully before beginning your project. Because proper preparation is the key to a
smooth installation job.
For installation questions, call 1-800-265-9829.
Remember to always exercise caution when on a construction site.
Tool Checklist:
• work table • tape measure • hammer
• utility knife • chalk line • square
• tin snips • level • safety glasses*
• ladders and/or scaffolding
• radial saw with a reversed fine-tooth blade
*NOTE: Protective eyewear should be worn when cutting, sawing, or nailing.
Some specialized tools include:
• snap-lock punch • nail-slot punch • zip tool