User Manual

2 CARACTERISTIQUES
3 FEATURES
R6X Receiver (#70216)
 Digital receiver with 6-channel able to effectively control model airplanes or gliders.
 Power supply from 4,8 V to 8,4 V (2S LiPo).
 Reverse polarity protection.
 Very low Amp draw.
 Very good resistance to voltage drops (insured up to 3.15 V operation).
 Very low reboot delay in case of loss of power.
 Receiving in the 2.4 GHz FHSS technology, providing a highly secure connection, optimum responsiveness, increased
range and the ability to fly more safely.
 High sensitivity allowing a ground range of more than 500m (in flight range is way higher)
 Very useful binding button, impossible to « loose » on the field.
 30mm long antenna allowing very easy mounting in any model.
 Very lightweight and small allowing this receiver to be mounted on any kind of models.
 Failsafe servo position setting to place servo in a certain position after a loss of signal.
 PPM connector (trainer, multirotor flight controller, flight simulator).
PARAMETRES VALEUR
Dimensions 34,2 x 18,4 x 8,7mm
Weight 6,5g
Receiving signal range 2,4GHz (2,4 à 2,483MHz)
Receiving signal type FHSS
Number of Channels (functions) 6 on UNI connectors
Power supply 4,8V to 8,4V on dedicated connector
Amp draw < 40mA
Security features Binding with Tx and programmable fail safe function
Channels resolution 1 µs
34
ANTENNA
BINDING
BUTTON
STATUS LED
CHANNELS
CONNECTOR
BATTERY CONNECTOR
PPM CONNECTOR