Manual

OMPLTV32.book Page 15 Fridav June 10. 2005 8:48 AM
ng the Display
The On-Screen Display (OSD) allows you to
configure the operation of the LCD. You can
change video and audio settings, activate and
configure picture-in-picture (PIP) and closed
captioning, select television channels, control
access to mature programming, and configure
other general display behavior.
The menu structure varies depending on the
selected signal source. The table below gives the
available options for each source.
VIDEO ADJUST >
AUDIO ADJUST >
LA/GUAGE SET UP>
CLOSED CAPTION >
V-CHIP BLOCK >
TV SET UP >
RESET
>
TV HDTV VGA DVI Comp SV AV
Video Adjust " " " " " " "
Audio Adjust " " " " " " "
Language Setup • • • • • • •
Closed Caption • • • •
V-Chip Block • • • •
TV Setup •
Reset • • • • • • •
To
1.
2.
3.
4.
5.
6.
use the OSD:
Press the MENU button on the remote or the top of the display.
Once the OSD appears, use the CH A and CH V buttons to navigate the menu items.
Press the SET button on the remote or the ENTER button on the top of the display to select
the desired item.
If an arrow is displayed to the right of the item name, a sub-menu will appear upon pressing
SET. Repeat steps 2 and 3 to navigate the sub-menu.
If the selected item is an adjustable parameter use VOL A and VOL V to adjust the
parameter and then press SET to accept.
Press MENU to return to the previous menu and, finally, exit the OSD.