Manual

OMPLTV32.book Page 13 Fridav June 10. 2005 8:48 AM
Using the Remote Control
Adjusts the audio volume
Y
CZD
ZOON
PUP
CZD
Switches between three display formats: Aspect (4:3), Panorama (15:9), and
Fill (16:9)
FiLL/PANORAMA ASPECT
Selects the PIP mode: Off, Standard PIP,PNP1, or PNP2
1 t_
PIP PNPI PNP2
Note= If there is no signal connected to the secondary source, the PIP secondary
window wilt not appear when in Standard PiP mode.
Mutes the audio
MUTE
SLEEP Sets the display sleep timer. The timer can be turned off or set to 30, 60, or 90
minutes.
DISPLA_ Displays current source and television channel information
s0uN0 Selects the sound enhancement mode: Off, Stereo Simulation, Surround 1, or
Surround 2
= BRIG+ Adjusts the display brightness
SET Selects the highlighted item or confirms the current adjustment
C_
MENU Brings up the On-Screen Display
S°SOURCE When PiP is active, selects the signal source used for the secondary PiP window
s.Pos When PiP is active and set to Standard PiP mode, this button adjusts the position
_) of the secondary PIPwindow.
s°s_E When PiP is active and set to Standard PiP mode, this button adjusts the size of
CZ) the secondary PIP window.
swAP When PIP is active, swaps the primary and secondary sources