Manual

OMPLTV32.book Page 9 ICriday, June 10, 2005 8:48 AM
g the Display
Turning the Display On and Off
Once the DC power adapter is connected properly to the display and the wall outlet, the display
may be turned on and off from the top of the display or the remote.
To turn the display on or off:
1. Press the POWER button.
Selecting the Video and Audio Source
The signal source may come from any of the inputs on the connector panel or the bottom of the
display. The SOURCE button cycles through these.
To change the audiolvideo source:
1. Press the SOURCE button until the correct source isselected.
The SOURCE button cycles through the following sources:
• TV
• HDTV (D4)
° VGA
• DVl
• COMP (Component Video)
• SV (S-Video)
° AV (Composite Video)
Adjusting the Volume
The audio volume may be adjusted from the remote or the top of the display.
To change the volume:
1. Press the VOL A and VOL V buttons.
Selecting the Channel
The channel may be selected from the remote or the top of the display.
To change the channel:
1. Ensure the source is set to TV.
2. Press the CH A and CH V buttons.
To change to a particular channel directly:
1. Ensure the source is set to TV.
2. Enter the desired channel number on the remote keypad.