Manual

OMPLTV32.book Page 4 Friday, June 10, 2005 8:48 AM
Setting Up the Display
Accessing the Connector Panel
All audio and video connections other than those for a television signal or a PC are
the connector panel. To accessthe jacks on the panel, remove the cover as shown below--rel;
the two tabs to the right, then pull the cover out.
Connecting to Composite Video Output Devices
Many video devices, such as VCRs, DVD players,
video game systems, and camcorders, have
composite video outputs. Composite video uses
one RCA cable to transmit video information and
generally provides lower quality than S-Video
and component video (see below).
Note: The composite video and S-Video inputs
share an audio input.
To connect a composite video source to the
display:
1. Remove the connector panel cover from the
rear of the display.
2. Using the included RCA cables (shown on
page 2), connect the composite video output
(yellow) on the source device to the
VIDEO-IN jack on the connector panel.
3. Connect the right (red) and left (white)
audio outputs on the source to the
corresponding AUDIO-IN jacks next to the
VIDEO-IN jack.
ace the connector panel cover.