Specifications

Includes: CENTROTEC chuck & bit holder, 2 x 2.6 Ah
Li-ion battery, charger
Effortlessly drive large fasteners
and tighten them "rock solid"
Drilling, driving and high-torque
fastening - all with one tool
IDC 15-2 TEC LI
636 496
in a Systainer
IDC 15-2 TEC LI IWC 18-2 TEC LI
• incredibly versatile: 2 drill/driving
gears and a high-torque impact
mode
• fast bit changes with the unique
CENTROTEC chuck system
• up to 2,000 rpm in 2nd gear for
precise drilling
• exceptional impact mode torque
- up to 200 Nm for large fasteners
• safe work on ladders, etc. - no recoil
in impact mode
• 1/2" square drive interface for
impact sockets
• incredibly versatile: 2 drill/driving
gears and a high-torque impact
mode
• up to 60 Nm torque for fastening
medium to large-sized screws
• exceptional impact mode torque
- up to 300 Nm to fasten/loosen
even the largest screws or nuts
• fast bit changes with the unique
CENTROTEC chuck system
• Accepts all CENTROTEC bits
• 1/2" square drive interface for
impact sockets
Includes: CENTROTEC chuck & bit holder, 2 x 2.6 Ah
Li-ion battery, charger
Specifications
Battery voltage/capacity 18V Li-ion 2.6 Ah
Speed (1st/2nd gear) 0-400/2000 rpm
Speed (impact mode) 0-1700 rpm
Impact frequency 0-3400 rpm
Max drill  in wood/metal 50/12 mm
Torque hard/soft 60/40 Nm
Torque (impact mode) 300 Nm
Weight (incl. CENTROTEC chuck) 2.3 kg
IWC 18-2 TEC LI
636 497
in a Systainer
Specifications
Battery voltage/capacity 14.4V Li-ion 2.6 Ah
Speed (1st/2nd gear) 0-400/2000 rpm
Speed (impact mode) 0-1700 rpm
Impact frequency 0-3400 rpm
Max drill  in wood/metal 45/12 mm
Torque hard/soft 55/35 Nm
Torque (impact mode) 200 Nm
Weight (incl. CENTROTEC chuck) 2.1 kg
Built for tough fastening jobs
For high torque fastening jobs, simply
switch to impact mode and let the
tool do the work, delivering up to
300 Nm of torque (200 Nm for IDC).
Yet with all that power, there's no
kickback – even when working with
one hand, so it's great for use on
stepladders.
With the impact mode engaged,
wheel nuts and screw anchors can be
tightened "rock solid". Stuck screws
can be released effortlessly and large
coach screws can be easily driven in
hardwood.
So, whether you are drilling,
screwdriving or securing large
fasteners in wood or steel – the
concentrated power of the IDC and
IWC ensures that even particularly
difficult drilling and fastening tasks
can be completed without any
trouble.
9
Seen at Ideal Tools.