Specifications

Innovative Multi-drivers
IDC Cordless Drill/Driver/Impact Driver
IWC Cordess Drill/Driver/Impact Wrench
Want to make sure you've always
got the right tool? These innovative
multi-task tools offer you a unique
combination of two drill/drive gears
and a high-torque impact mode for
effortless fastening of very large
fasteners - with no kickback!
With the IDC and IWC, you can do it
all: from drilling small diameter holes
in wood or steel or driving small gauge
screws in wood, to driving large framing
fasteners, fastening anchors in concrete
or drilling pilot holes in steel for blind
rivets - ideal for riggers and trades
working with hardwoods.
Using the IDC/ IWC in one of the
drill/driver settings along with the
CENTROTEC IP chuck and bit system,
you can quickly switch between drilling
and fastening, so it's perfect for
building trades.
In 1st drill/driving gear, the IDC and
IWC generate up to 50Nm and 60 Nm
of torque respectively. This is suitable
for driving medium and large-sized
screws.
In 2nd drill/driving gear, the IDC and
IWC generate up to 2,000 rpm, an
ideal speed for precise drilling in wood.
QuaDrive cordless multi-drivers with impact mode
8
Seen at Ideal Tools.