Specifications

Application
Finish
• Aggressive resurfacing and
removing adhesives from cured
concrete and hard plaster
Coarse
Type: SZ
• Aggressive resurfacing and
removing adhesives from green
concrete and soft plaster
Smooth
Type: FZ
• Aggressive resurfacing and
removing adhesives from cured
concrete and hard plaster
Very Coarse
Type: PZ
• Resurfacing and removal of
formwork marks from cured
concrete and hard plaster
Coarse
Type: DIA-Hard
• Removal/resurfacing of green
concrete, sandstone, soft plaster, tile
adhesives etc.
• Grinding cement screed
Smooth
Type: DIA-Abrasive
• Removal of elasticised coatings
and adhesives from cured concrete
and hard plaster
Coarse
Type: HW-Coarse
• Removal of elasticised coatings
and adhesives from filling
compounds, soft plaster.
• Smoothing concrete, sandstone,
soft plaster etc
Smooth
Type: HW-Fine
Includes
Grinding head, spanner, VibraStop side handle, in a Systainer
.
Specifications
Rated input 1500 W
No-load speed 1000 - 2 200 rpm
Grinding disc ¼ 150 mm
Drive shaft D 14 mm / M6
Extraction port ¼ 36 mm
Weight 5.2 kg
RGP 150-15 E-Plus
150mm diameter concrete restoration
grinder for large surfaces
RGP 150-15 E SZ-Plus 626 378
RGP 150-15 E FZ-Plus 626 379
RGP 150-15 E PZ-Plus 626 380
RGP 150-15 E DIA-Plus 626 381
RGP 150-15 E HW-Plus 626 382
all models come in a Systainer
• powerful 1500W motor for fast resurfacing of concrete,
masonry and brick surfaces
• consistent results - constant speed under load, soft start
and thermal overload protection
• maintains a clean worksite - excellent dust
extraction when used with a Protool extractor
• fast, easy and accurate depth adjustment
• tether eyebolt for safety, support when resurfacing walls
• Guide system for ergonomic sanding of floors (sold
separately)
• See table on page 23 for guidance on selecting the
proper grinding head for your application.
Restoration grinders
22
Seen at Ideal Tools.