Operation Manual

DRP 18-4 DEC FF/ PDP 20-4 DEC FF
11
GB
Original operating manual
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1Symbols
2 Machine features
3 Intended use
The machine
DRP 18-4 DEC FF
– was designed for drilling into wood, metal,
ceramic and plastic.
PDP 20-4 DEC FF
– was designed for impact drilling into tiles,
concrete and masonry as well as
– drilling into wood, metal, ceramic and plas-
tic.
Machines with forward/reverse setting are
also suitable for fastening screws and tap-
ping threads.
The user is liable for improper or non-
intended use.
4 Technical data
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Do not throw in the household waste.
Fastening / Drilling mode
Impact drilling mode
[1-1] Bit store
[1-2] LED light switch
[1-3] LED lamp
[1-4] Speed set button
[1-5] Switch for selecting drilling/fasten-
ing or impact drilling mode (only
PDP 20-4 DEC FF)
[1-6] Gear switch
[1-7] On/Off switch
[1-8] Right/left switch
[1-9] Mains power cable
[1-10] Belt clip
[1-11] Additional handle
Drill / Impact drill DRP 18-4 DEC FF PDP 20-4 DEC FF
Power 705 W
No-load speed 1st gear 0 - 400
rpm
0 - 400
rpm
2nd gear 0 - 850
rpm
0 - 850
rpm
3rd gear 0 - 1900
rpm
0 - 1900
rpm
4th gear 0 - 4000
rpm
0 - 4000
rpm
Impact count 1st gear - 0 - 8200
rpm
2nd gear - 0 - 17000
rpm
3rd gear - 0 - 38000
rpm
4th gear - 0 - 79000
rpm
Chuck clamping range 1,5 - 13 mm
Max. drilling diameter Wood 50 mm
Metal 18 mm
Concrete 20 mm