User`s guide

3: BSC 3270 DLI Functions
DC 900-1340I 81
Table 3–10: BSC 3270 Response Codes
Category
DLI Response Code in
pOptArgs.usProtCommand Field
Usage Section
Received Data
DLI_PROT_SEND_NORM_DATA
Normal received data Section 3.5.1
DLI_PROT_SEND_NORM_DATA_EOM
Normal received data
(end of message)
Section 3.5.1
DLI_PROT_SEND_TRANS_DATA
Transparent received data Section 3.5.1
DLI_PROT_SEND_TRANS_DATA_EOM
Transparent received data
(end of message)
Section 3.5.1
Sense/Status
Message
DLI_PROT_SEND_PRIOR_DATA_EOM
BSC 3270 sense/status message Section 3.5.2
Errors
a
DLI_PROT_RESP_ERROR
Error report; the dlRead pOptArgs.
iICPStatus field contains more infor-
mation.
Appendix D
Acknowledg-
ments
DLI_PROT_RESP_LOCAL_ACK
Acknowledgment that a transmission
buffer has been sent (if the pOptArgs.
iICPStatus field = 1). If it is less than
zero, an error has occurred.
Section 3.4.3.1
and
Section 3.4.3.2
DLI_PROT_RESP_BIND_ACK
Acknowledgment of Start Link com-
mand
Section 3.4.1.5
DLI_PROT_RESP_UNBIND_ACK
Acknowledgment of Stop Link com-
mand
Section 3.4.1.6
DLI_PROT_SAFE_STORE_ACK
Safe store acknowledge: 1) the last
data block has been successfully
acknowledged by the remote com-
puter, or 2) the safe store option was
switched from disable to enable while
the link was active.
Section 3.4.1.8
Command
Confirmations
DLI_PROT_SET_TRANS_TABLE
Set Translation Table confirmation Section 3.4.1.1
DLI_PROT_CLR_STATISTICS
Clear Statistics confirmation Section 3.4.1.2
DLI_PROT_SET_BUF_SIZE
Set ICP Message Buffer Size confirm Section 3.4.1.3
DLI_PROT_CFG_LINK
Configure Link confirmation Section 3.4.1.4
DLI_PROT_SET_POLL_LIST
Set Poll List confirmation Section 3.4.1.7
DLI_PROT_SET_SPECIAL_POLL
BSC 3270 Special Poll confirmation Section 3.4.1.9
DLI_PROT_SEND_EOT
Send EOT confirmation Section 3.4.1.10
DLI_PROT_CREATE_DEVICE
Create Virtual Device confirmation Section 3.4.1.11
DLI_PROT_CHANGE_STATUS
Change Virtual Device Status confirm Section 3.4.1.12