User`s guide

F: BSC Detailed Command and Response Formats
DC 900-1340I 251
Notes:
1. Zero (0) for Big Endian clients (such as SunOS)
0x4000 for Little Endian clients (such as DEC)
2. DLI return status (See Appendix D)
3. Protocol status (See Appendix D)
4. Only one DLI_PROT_SET_BUF_SIZE command can be sent as the first command after the first
attach, and the usProtLinkID field must match the link specified on the attach.
5. The usProtSessionID that was returned on the DLI_ICP_CMD_ATTACH command
Table F– 6: DLI_PROT_SET_BUF_SIZE Command and Response
Header Field
Command Value
(Write)
Response Value
(Read)
ICP_header
fill1 0 N/A
fill2 0 N/A
iICPSize 18 18
usICPCommand
DLI_ICP_CMD_WRITE DLI_ICP_CMD_WRITE
iICPStatus See Note 1. See Note 2.
usICPParms[0] 0 N/A
usICPParms[1] 0 N/A
usICPParms[2] 0 N/A
Prot_header
usProtCommand
DLI_PROT_SET_BUF_SIZE DLI_PROT_SET_BUF_SIZE
iProtModifier 0 See Note 3.
usProtLinkID See Note 4. N/A
usProtCircuitID 0 N/A
usProtSessionID See Note 5. See Note 5.
fill3 0 N/A
fill4 0 N/A
fill5 0 N/A