User`s guide

192 DC 900-1340I
BSC Programmer’s Guide
dsrDelay 3 1–127
ttdLimit 0 0–8192
discTimerLen 0 0–1800
modemType “SADL” “none”, “SADL”, “V25bis” or “AT”
elecInterface “EIA232” “EIA232”, “EIA485”, “EIA530”, “V35”, “unbEIA449” or
“EIA562”
lineType “leased” “leased” or “dialUp”
msgBlkSize
1
1024 256–8192
writeType
2
“normal” “normal” or “transparent”
1
The msgBlkSize parameter allows the DLI to configure the ICP message buffer size (equivalent to the Set
ICP Message Buffer Size command in Section 5.4.1.3 on page 119).
2
If you use dlWrite without optional arguments, one of the EOM types is used, depending on the writeType
DLI configuration parameter. If writeType is set to “normal,” DLI_PROT_SEND_NORM_DATA_EOM is used; if it is set
to “
transparent,” DLI_PROT_SEND_TRANS_DATA_EOM is used.
Table 7–2: BSC 2780/3780 ICP Link Parameters and Defaults for Using dlicfg (Cont’d)
dlicfg Option Name Default Valid Values