User`s guide
152 DC 900-1340I
BSC Programmer’s Guide
Command
Confirmations
DLI_PROT_SET_TRANS_TABLE
Set Translation Table confirmation. Section 5.4.1.1
DLI_PROT_CLR_STATISTICS
Clear Statistics confirmation. Section 5.4.1.2
DLI_PROT_SET_BUF_SIZE
Set ICP Message Buffer Size confirma-
tion.
Section 5.4.1.3
DLI_PROT_CFG_LINK
Configure Link confirmation. Section 5.4.1.4
DLI_PROT_SEND_EOT
Send EOT confirmation Section 5.4.1.8
DLI_PROT_SEND_DISC
(1) Send DLE EOT confirmation, or
(2) the BSC software received a DLE
EOT from the line. Any queued outgo-
ing messages are returned with the
dlRead pOptArgs.iICPStatus field set
to
DLI_ICP_ERR_XMIT_ABORTED.
Section 5.4.1.9
DLI_PROT_SEND_SIGNON
Send Signon confirmation Section 5.4.1.10
DLI_PROT_SET_SPECIAL_POLL
Poll Line with No Data confirmation Section 5.4.1.11
DLI_PROT_FLUSH_QUEUE
Flush Queue confirmation sent to the
client after any queued outbound mes-
sages have been returned with the
dlRead pOptArgs.iICPStatus field set
to
DLI_PROT_RESP_LOCAL_ACK and an
error in the dlRead pOptArgs
.iICPStatus field.
Section 5.4.1.12
DLI_PROT_MODEM_CFG
Modem Configuration confirmation
after the BSC software receives a
response from the modem. If any fail-
ure occurs, the dlRead pOptArgs
.iICPStatus field contains one of the
error codes shown in Ta bl e 5– 6.
Section 5.4.1.14
DLI_PROT_START_LINK_TRACE
Start Trace confirmation Section 5.4.1.15
DLI_PROT_STOP_LINK_TRACE
Stop Trace confirmation Section 5.4.1.15
Reports
DLI_PROT_GET_BUF_REPORT
Buffer report Section 5.4.2.1
DLI_PROT_GET_LINK_CFG
Link configuration report Section 5.4.2.2
DLI_PROT_GET_STATISTICS_REPORT
Statistics report Section 5.4.2.3
DLI_PROT_GET_STATUS_REPORT
Link status report Section 5.4.2.4
DLI_PROT_GET_TRANS_TABLE
Translation table report Section 5.4.2.5
DLI_PROT_GET_SOFTWARE_VER
Software version ID report Section 5.4.2.6
1
All of the responses, as well as the error report, can return an error code in the dlRead pOptArgs.iICPStatus field.
Table 5–12: BSC 2780/3780 Response Codes (Cont’d)
Category
DLI Response Code in
pOptArgs.usProtCommand Field Usage
Reference
Section