User`s guide

5: BSC 2780/3780 DLI Functions
DC 900-1340I 151
Table 5–12: BSC 2780/3780 Response Codes
Category
DLI Response Code in
pOptArgs.usProtCommand Field
Usage
Reference
Section
Received Data
DLI_PROT_SEND_NORM_DATA
Normal received data Section 5.5.1
DLI_PROT_SEND_NORM_DATA_EOM
Normal received data
(end of message)
Section 5.5.1
DLI_PROT_SEND_TRANS_DATA
Transparent re ceived data Section 5.5.1
DLI_PROT_SEND_TRANS_DATA_EOM
Transparent re ceived data
(end of message)
Section 5.5.1
DLI_PROT_SEND_2780_DATA
Transparent 2780 record data Section 5.5.1
DLI_PROT_SEND_2780_DATA_EOM
Transparent 2780 record data
(end of message)
Section 5.5.1
DLI_PROT_LINK_TRACE_DATA
Link trace data Section 5.4.1.15
Errors
1
DLI_PROT_RESP_ERROR
Error report; the dlRead pOptArgs.
iICPStatus field contains more infor-
mation.
Appendix D
Acknowledgments
DLI_PROT_RESP_BIND_ACK
Acknowledgment of Start Link com-
mand
Section 5.4.1.5
DLI_PROT_RESP_UNBIND_ACK
Acknowledgment of Stop Link com-
mand
Section 5.4.1.6
DLI_PROT_RESP_LOCAL_ACK
Acknowledgment that a transmission
buffer has been sent (if the dlRead
pOptArgs.iICPStatus field = 1). If it is
less than zero, an error has occurred.
Section 5.4.3
DLI_PROT_SAFE_STORE_ACK
Safe store acknowledge: 1) the last data
block has been successfully acknowl-
edged by the remote computer, or 2)
the safe store option was switched
from disable to enable while the link
was active.
Section 5.4.1.7
DLI_PROT_START_AUTODIAL
Acknowledge response to an Autodial
Start command. If any failure occurs,
the link is disabled, and the dlRead
pOptArgs.iICPStatus field contains
one of the error codes in Table 5 –6.
Section 5.4.1.13
a
All of the responses, as well as the DLI_PROT_RESP_ERROR error report, can return an error code in the dlRead pOptArgs.iICPStatus field.