User`s guide

104 DC 900-1340I
BSC Programmer’s Guide
report. If the signal returns before the delay time expires, the timer is reset and no report
is made.
To set this option using the DLI configuration file, use the dsrDelay parameter; for
example,
dsrDelay = 3. See Table 7–1 on page 190.
4.24 Electrical Interface Option (40)
The electrical interface option applies to the Freeway 1000 model only and allows the
electrical interface for each link to be set. The valid values are EIA-232 (default),
EIA-485, EIA-530/EIA-449 (balanced, EIA-422), V.35, EIA-449 (unbalanced, EIA-
423), and EIA-562. Refer to the ICP2424 Hardware Description and Theory of Operation
guide for more information on electrical interfaces and cabling options.
To set this option using the DLI configuration file, use the elecInterface parameter; for
example,
elecInterface = “EIA232”. See Table 7 –1 on p ag e 19 0.